624434
32
Zoom out
Zoom in
Previous page
1/157
Next page
32 Copyright © Acronis, Inc., 2000-2009
3.7.4 Limitations in using Acronis Universal Restore
1. The system recovered by Acronis Universal Restore might not start if the partition
structure in the image or the target disk partitioning does not coincide with that of the
source disk. As a result, the loader, restored from the image, will point to the wrong
partition and the system will not boot or will malfunction.
Such might be the case if you:
- image only selected partitions but not the entire source disk
Keep in mind, that the source disk may have a hidden maintenance partition created by
the computer vendor. Therefore, if you check each partition for backup instead of
checking the disk, this hidden partition will not be included into the image.
- restore not the entire source disk, but only the selected partitions. In some cases,
especially if your system resides on a partition other than the first, this can confuse the
loader and prevent the restored system from startup.
To avoid the problem, we recommend that you image and restore the entire system disk.
2. The Acronis Universal Restore option does not work if a computer is booted with
Acronis Startup Recovery Manager (using F11) or the backup image is located in Acronis
Secure Zone. This is because Acronis Startup Recovery Manager and Acronis Secure Zone
are primarily meant for instant data recovery on the same computer.
3.7.5 Getting Acronis Universal Restore
Acronis Universal Restore is an add-on to Acronis True Image Echo Workstation. It is
purchased separately, has its own license, and is installed from a separate setup file.
Let’s assume for a moment that you own Acronis True Image Echo Workstation but have
not purchased Acronis Universal Restore. When you create a task for restoring a Windows
system disk and select a target disk (either physical or virtual) in the Restore Data Wizard,
the program compares crucial for the system start devices found in the image registry and
the target computer registry. If the chipset, motherboard or mass storage device are
different, and therefore there is a risk that the system cannot boot, you will be prompted
whether you want to buy Acronis Universal Restore. To buy the option, follow the link:
http://www.acronis.com/enterprise/pro
ducts/ATICW/universal-restore.html
If you already have Acronis Universal Restore, the prompt will not come up and you will
have an option to enable Acronis Universal Restore later in the Restore Data Wizard.
3.8 Backing up to tape libraries and tape drives
A tape library is a high-capacity storage device consisting of one or more tape drives and
a loader that automatically selects and loads multiple tape cartridges. Tape libraries with
only one drive and loader are known as autoloaders.
Acronis True Image Echo Workstation supports tape libraries, autoloaders, and SCSI tape
drives as storage devices.
Tape libraries, autoloaders and tape drives are accessible through the Acronis Backup
Server. Acronis True Image Echo Workstation local version can access tape drives only.
The following diagram illustrates ways of access to tape devices for networks with (I) and
without (II) backup server.
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Acronis True Image Echo Workstation at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Acronis True Image Echo Workstation in the language / languages: English as an attachment in your email.

The manual is 3,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Acronis True Image Echo Workstation

Acronis True Image Echo Workstation User Manual - German - 186 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info