624433
93
Zoom out
Zoom in
Previous page
1/120
Next page
93 Copyright © Acronis, Inc., 2000-2009
Chapter 13. Transferring the system to a
new disk
13.1 General information
Sooner or later computer users find that their hard disk is just too small. If you don’t have
space for more data, you can add another disk specifically for data storage.
For example, you might find that your hard disk does not have enough space for the
operating system and installed applications, preventing you from updating your software.
In this case, you have to transfer the system to a higher-capacity hard disk.
To transfer the system, you must first install the disk in the server. If a server doesn’t
have a bay for another hard disk, you can temporarily install it in place of your CD-ROM.
If that is not possible, you can clone a hard disk by creating its image and restoring it to a
new hard disk with larger partitions.
There are two transfer modes available: automatic and manual.
In the automatic mode, you will only have to take some simple actions to transfer all the
data, including partitions, folders and files, to a newer disk, making it bootable if the
original disk was bootable.
There will be only one difference between these disks – partitions on the newer disk will
be larger. Everything else, including the installed operating systems, data, disk labels,
settings, software and everything else on the disk, will remain the same.
This is the only result available in the automatic mode. The program can only duplicate
the original disk layout to the new one. To obtain a different result, you will have to
answer additional questions about cloning parameters.
The manual mode will provide additional data transfer flexibility.
1. You will be able to select the method of partition and data transfer:
as is
new disk space is proportionally distributed among the old disk partitions
new disk space is distributed manually
2. You will also be able to select operations to perform on the old disk:
leave partitions (and data) on the old disk
remove all information from the old disk
create new partitions on the old disk (and remove all the older information)
On program screens, damaged partitions are marked with a red circle and a white “X”
inside in the upper left corner. Before you start cloning, you should check such disks for
errors using the appropriate operating system tools.
13.2 Security
Please note the following: If the power goes out or you accidentally press RESET during
the transfer, the procedure will be incomplete and you will have to partition and format or
clone the hard disk again.
93


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Acronis True Image Echo Server for Windows at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Acronis True Image Echo Server for Windows in the language / languages: English as an attachment in your email.

The manual is 2,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Acronis True Image Echo Server for Windows

Acronis True Image Echo Server for Windows User Manual - German - 140 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info