624460

Acronis True Image 9.1 Workstation Manual

26
Zoom out
Zoom in
Previous page
1/115
Next page
26 Copyright © Acronis, Inc., 2000-2007
3.7.4 Using Acronis Universal Restore in virtual environment
Virtual machine technologies provide a powerful tool to help accelerate the development,
testing, deployment and support of PC applications. Using Acronis True Image Workstation
with Acronis Universal Restore you can perform real-to-virtual and virtual-to-real computer
migration in the same way as with real systems.
If the virtual hard drive uses SCSI controller, you should provide appropriate drivers while
performing system restore to the virtual machine. For example, the widespread VMware
environment requires Buslogic or LSI logic drivers. Use drivers bundled with your virtual
machine software or download the latest drivers versions from the software manufacturer
website.
3.7.5 Limitations in using Acronis Universal Restore
1. The system recovered by Acronis Universal Restore may not start if the partition structure
in the image or the target disk partitioning does not coincide with that of the source disk. As
a result, the loader, restored from the image, will point to the wrong partition and the
system will not boot or will malfunction.
Such might be the case if you:
- image not the entire source disk, but only the selected partitions
Keep in mind, that the source disk may have a hidden maintenance partition created by the
computer vendor. Therefore, if you check each partition for backup instead of checking the
disk, this hidden partition will not be included into the image.
- restore not the entire source disk, but only the selected partitions. In some cases,
especially if your system resides on other than the first partition, this can confuse the loader
and prevent the restored system from startup.
To avoid the problem, we recommend that you image and restore the entire system disk.
2. The Acronis Universal Restore option does not work if a computer is booted with Acronis
Startup Recovery Manager (using F11) or the backup image is located in Acronis Secure
Zone. This is because Acronis Startup Recovery Manager and Acronis Secure Zone are
primarily meant for instant data recovery on the same computer.
3.7.6 Getting Acronis Universal Restore
Acronis Universal Restore is an add-on to Acronis True Image Workstation. It is purchased
separately and installed from a separate setup file.
3.8 Backing up to tape drive
Acronis True Image Workstation supports SCSI tape drives. It can store backups on the tape
and restore data from the tape, store large backups to multiple tapes, and append
incremental/differential changes to a tape with the existing archives.
If a SCSI tape drive is connected to the computer, controlling the backup process (i.e. where
you are running Acronis True Image Workstation local version or Acronis True Image
Management Console) the list of devices available for backup storage will be extended with a
name corresponding to the drive type.
To place backup archives on a tape drive connected to another network computer, install
Acronis Backup Server on that computer. Then a new device type named “Acronis Backup
Server” will appear in the list of devices, and you will be able to access the tape under this
device.
… 26 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Acronis True Image 9.1 Workstation at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Acronis True Image 9.1 Workstation in the language / languages: English as an attachment in your email.

The manual is 3,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Acronis True Image 9.1 Workstation

Acronis True Image 9.1 Workstation User Manual - German - 137 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info