624415

Acronis True Image 2014 Manual

242
Zoom out
Zoom in
Previous page
1/257
Next page
242 Copyright © Acronis International GmbH, 2002-2013
3. After Acronis True Image 2014 starts, click the My Disks link under Recover on the Welcome
screen.
4. Choose the vhd backup file to be used for recovery by its creation date. When the required vhd
backup is not shown, click Browse, choose Windows Backup Archives (*.vhd) in the "Files of
type" field and locate the backup for recovery.
Even if the required vhd backup is shown on the screen, after you choose it Acronis True Image 2014 may
display the following message: "Acronis True Image 2014 cannot detect volume 1 of "Backup_Name"
archive", where Backup_Name is the name of the chosen backup. This is because disk letters in the
standalone Acronis True Image 2014 may differ from those in Windows and the path to this backup stored
in the metadata information will point to the wrong location. In such case click Browse, choose Windows
Backup Archives (*.vhd) in the "Files of type" field and locate the backup for recovery.
5. At the next step select Recover whole disks and partitions (if it is not selected) and click Next.
6. Select the system partition at the What to recover step. Usually you will not need to recover the
MBR.
7. Then specify the settings of the selected system partition: location, type (primary, active) and
size. When recovering the partition to the original location, you do not need to make any setting
changes.
8. Read the Summary of the recovery operations and then click Proceed.
You can also recover partitions and disks from vhd files while working in Windows. This is preferable
for recovering data partitions and disks.
8.13.3 Booting from a .tib image of your system partition
Users of Windows 7 Enterprise, Windows 7 Ultimate and Windows 8.1 can boot from .tib images of
Windows system partition. This allows you to test bootability of the backed up system without actual
recovery. Booting can be done only when running Acronis True Image 2014 in Windows.
To test whether your system partition backup can be recovered to a bootable operating system:
1. Open Acronis Boot Sequence Manager by clicking Boot Sequence Manager on the Tools &
Utilities screen.
2. Click Add on the toolbar of Acronis Boot Sequence Manager and browse for the required .tib file,
then click OK.
3. Because actual booting is performed from VHD, the program needs to convert the selected .tib
file so the appropriate dialog will appear.
4. Click OK if you want to save the converted file to the default location with the same name or
browse for another location. Saving to another location allows you to change the name of the
.vhd file.
Booting is possible only when the .vhd file is located on an NTFS-formatted local hard disk.
If there is not enough space for the converted file in the selected location, the program will
notify you. You can delete unnecessary files and click Retry or cancel the conversion and repeat
the operation choosing another location for the converted file.
5. After the conversion process finishes a new line with the .vhd filename will be added to the
Acronis Boot Sequence Manager.
To use the VHD for booting, the partition with the converted vhd file must have sufficient free space. TIB
files are converted into dynamic VHDs with the maximum size that equals the size of a partition backed up
into a .tib file. When you boot from a dynamic .vhd file, the VHD is automatically expanded to the
… 242 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Acronis True Image 2014 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Acronis True Image 2014 in the language / languages: English as an attachment in your email.

The manual is 8,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Acronis True Image 2014

Acronis True Image 2014 User Manual - German - 271 pages

Acronis True Image 2014 User Manual - Dutch - 267 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info