624453
116
Zoom out
Zoom in
Previous page
1/121
Next page
116 Copyright © Acronis, Inc., 2000-2007
In BIOS setup, you can set the Type parameter to User Type HDD (user-defined
type). In this case, you also have to specify the value of the translation mode
parameter, which can be Auto/Normal/LBA/Large.
T
ranslation mode is how sector addresses are translated. This parameter appeared because
in BIOS versions, there were limitations to the maximum address capacity of disks, which is
504 MB (1024 cylinders x 16 heads x 63 sectors x 512 bytes). There are two ways to
bypass this limitation: (1) switch from physical to logical sector addresses (LBA), (2) use
mathematics to reduce the number of addressed sectors (cylinders) and increase the
number of heads; this method is called Lar
g
e Disk (Lar
g
e). The simplest decision is to set
the value of this parameter to Auto.
If there are several hard disks connected to your motherboard, but you do not want
to use some of them at the moment, you have to set the Type of these disks to Not
Installed.
Parameters of hard disks can be set manually with the help of information provided
by the hard disk manufacturer on its case, but it is easier to use the IDE
autodetection utility that is usually included in modern BIOS versions.
The utility is sometimes a separate BIOS menu item and sometimes is included in
the standard CMOS setup menu.
Please note that in "Appendix B. Hard disks and BIOS setup", we have described the
general details of
physical hard disk structure. Built-in IDE hard disk controls mask the
physical disk structure. As a result, the BIOS of the motherboard "sees"
logical cylinders,
heads and sectors. We are not
g
oin
g
to elaborate on this issue here, but knowin
g
about this
can sometimes be useful.
B.2.3 Arranging boot sequence, advanced CMOS setup menu
Aside from standard CMOS setup, BIOS menu usually has an advanced CMOS setup
item. Here you can adjust the boot sequence: C:; A:; CD-ROM:.
Please note that
boot sequence mana
g
ement differs for various BIOS versions, e.
g
. for
AMI BIOS, AWARDBIOS, and brand-name hardware manufacturers.
Several years ago, the operating system boot sequence was hard-coded into the
BIOS. An operating system could be booted either from a diskette (drive A:), or
from the hard disk C:. That was the sequence in which the BIOS queried external
drives: if drive A: was ready, BIOS attempted to boot an operating system from a
diskette. If the drive was not ready or there was no system area on diskette, BIOS
tried to boot an operating system from hard disk C:.
At present, BIOS allows booting operating systems not only from diskettes or hard
disks, but also from CD-ROMs, DVDs, and other devices. If there are several hard
disks installed in your computer labeled as C:, D:, E:, and F:, you can adjust the
boot sequence so that an operating system is booted from, for example, disk E:. In
this case, you have to set the boot sequence to look like E:, CD-ROM:, A:, C:, D:.
T
his does not mean that bootin
g
is done from the first disk in this list; it only means that
the first attempt to boot an operatin
g
system is to boot it from this disk. There may be no
operating system on disk E:, or it may be inactive. In this case, BIOS queries the next drive
in the list. Errors can happen during booting, see
B.2.4 "Hard disk initialization errors".
116


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Acronis True Image 11 Home at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Acronis True Image 11 Home in the language / languages: English as an attachment in your email.

The manual is 4,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Acronis True Image 11 Home

Acronis True Image 11 Home User Manual - German - 127 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info