284412

Acronis disk director suite 10 Manual

40
Zoom out
Zoom in
Previous page
1/96
Next page
40 Copyright © Acronis, Inc., 2000-2010
5.16 Removing a mirror
Mirrored volumes provide fault tolerance by storing two exact copies of data—called mirrors—on
two different disks.
Removing a mirror from a mirrored volume means converting that volume to a simple volume, thus
losing fault tolerance.
The space that was occupied by the removed mirror becomes unallocated space on the
corresponding disk (provided that that disk is not missing).
You may want to remove a mirror in the following cases:
When you need extra unallocated space on a disk containing one of the mirrors, at the expense
of losing fault tolerance
When a disk containing one of the mirrors becomes missing—for example, after you replaced a
failed hard disk drive with a new one
You can later make the volume fault-tolerant again by adding a mirror to it—see Add mirror (p. 35).
You cannot remove a mirror when both disks containing the mirrored volume are missing.
To remove a mirror from a mirrored volume
1. Right-click the mirrored volume from which you want to remove a mirror, and then click Remove
mirror.
2. Select the mirror that you want to remove.
Note: If one of the mirrors is located on a missing disk, you can remove only that mirror.
3. Click OK to add the pending mirror removal operation.
The results of the pending operation are immediately displayed as if the operation had been
performed.
To perform the pending operation you will have to commit it (p. 20). Exiting the program without
committing the pending operations will effectively cancel them.
5.17 Breaking a mirrored volume
Mirrored volumes provide fault tolerance by storing two exact copies of data—called mirrors—on
two different disks.
Breaking a mirrored volume means converting its two mirrors into two independent simple volumes
with initially identical content.
One of the two volumes will retain the drive letter and volume label of the mirrored volume. You can
assign a drive letter and/or volume label to the other volume.
This operation differs from removing a mirror—see Remove mirror (p. 36)—in that when you remove
a mirror, only the remaining mirror becomes a simple volume.
You can break a mirrored volume only when the disks containing both of its mirrors are online.
To break a mirrored volume
1. Right-click the mirrored volume that you want to break, and then click Break mirror.
… 40 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Acronis disk director suite 10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Acronis disk director suite 10 in the language / languages: English as an attachment in your email.

The manual is 1,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Acronis disk director suite 10

Acronis disk director suite 10 User Manual - German - 113 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info