Manual Acronis disk director suite 10 (page 29 of 96) (English)

284412

Zoom out

Zoom in

1/96

2. Specify the type that the new volume will have. Every volume type is provided with a brief

description to let you better understand the advantages and limitations of each possible volume

type. To learn more about volume types—see Types of basic volumes (p. 11) and Types of

dynamic volumes (p. 12).

The list of volume types contains only the types that are supported (p. 13) by the current operating system.

3. Depending on the type of the new volume, specify one or more disks where you want to create

the new volume:

 If the new volume is basic, select one basic disk and specify one region of unallocated space

on that disk.

Note: You cannot create a basic volume on a disk that already has four primary volumes; you first need

to convert one of those volumes to logical—see Converting a primary volume to logical (p. 33). This

restriction does not apply to GPT disks.

 If the new volume is simple or spanned, select one or more disks.

 If the new volume is striped, select two or more disks.

 If the new volume is mirrored, select two disks.

Note for striped and mirrored volumes: Because these volumes occupy space on their disks in equal parts,

the maximum size of such volume will depend on the selected disk with the least amount of unallocated

space.

When creating a dynamic volume and selecting one or several basic disks as its destination, the

selected disks will be converted to dynamic automatically.

4. Specify the size of the new volume. By default, the volume size is set to maximum. To specify a

different size, move the slider or enter the required value into the Volume size field.

If the disk still has unallocated space after you have set the size of the volume, you can set the

amount of unallocated space before and after the basic volume. To do this, drag the volume

within the unallocated space, or type the required amount of space before and after the volume

in the respective fields.

In the volume layout diagram at the bottom of the window, you can specify the space that the

volume will occupy on each of the selected disks, by typing the amounts or by dragging the

sliders.

5. Specify the following options of the new volume:

 File system (by default, NTFS). Some of the supported file systems (p. 7) will be disabled

depending on the chosen volume type and size—for example, FAT32 will be disabled if the

volume size has been set at more than 2 TB.

 Cluster size. Select the cluster size—the smallest amount of disk space which will be

allocated to store a file. We recommend leaving the default size, which is marked in the list

as (default). The default cluster size depends on the volume size and the type of the file

system—for example, the default cluster size for up to 2-TB NTFS volumes is 4 KB.

 Volume label (by default, NONE). A short name that you can assign to a volume to better

differentiate it from other volumes. The maximum length of a volume label depends on the

volume’s file system—see Changing a volume label (p. 32).

 Letter (by default, the first free letter of the alphabet). Assign a drive letter to the volume to

be able to locate files and folders on it.

If the new volume is basic, specify whether it will be:

 Primary. Set the volume as Primary, if you plan to install an operating system on it. Mark the

primary volume as Active, if you need the machine to start from this volume.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Acronis disk director suite 10 in the language / languages: English as an attachment in your email.

The manual is 1,22 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Acronis disk director suite 10

Acronis disk director suite 10 User Manual - German - 113 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Acronis disk director suite 10 Manual

Product: