284412

Acronis disk director suite 10 Manual

21
Zoom out
Zoom in
Previous page
1/96
Next page
21 Copyright © Acronis, Inc., 2000-2010
I/O errors are found on a dynamic disk. If a disk has errors, we recommended you to repair it as
soon as possible to avoid data loss.
Offline
A dynamic disk is accessible in read only mode (if you switched it to offline previously), or not
accessible at all (corrupted or intermittently unavailable). You can make the disk that you
previously switched to offline, fully accessible—see Changing a disk status: offline to online (p.
46).
Foreign
This status occurs when you move a dynamic disk to your machine from another computer. To
access data on foreign disks, you have to add these disks to your machine's system
configuration—see Importing foreign disks (p. 47), or convert them to basic disks—see Disk
conversion: dynamic to basic (p. 45).
Missing
A dynamic disk is corrupted, powered down, or disconnected.
Not Initialized
A disk does not contain a valid signature. After you install a new disk, the disk must be registered
in the operating system—see Disk initialization (p. 41). Only then, you can create volumes on that
disk.
To find out more information about disk statuses, please refer to the Disk status descriptions article
on the Microsoft website.
Important! For instructions explaining how to repair disks with an Online (Errors), Offline, or Missing status,
please refer to the Troubleshooting Disk Management article on the Microsoft website.
4.5.2 Volume statuses
Check a volume status to make sure the volume is accessible and works without problems. Volume
statuses appear both in the table and graphical panel.
Here are brief descriptions of the most common volume statuses:
Healthy
A basic or dynamic volume is accessible and functioning correctly. This is the normal volume
status.
The Healthy status often has a number of substatuses that are displayed in the table view (in
parentheses) and in the graphical view (below the volume size and separated by a semicolon).
The System, Boot and Active substatuses are the most common and described in the Active,
system, and boot volumes (p. 13) section.
The healthy volume whose file system is corrupted is marked with the following icon:
Failed
A dynamic volume (striped, or spanned) cannot be started automatically, or one of the
underlying disks is missing.
Failed Redundancy
The data on a mirrored volume is no longer fault tolerant because one of the dynamic disks is not
online. You can access the volume until the remaining dynamic disk is online. To avoid data loss,
we recommend you to repair the volume as soon as possible.
… 21 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Acronis disk director suite 10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Acronis disk director suite 10 in the language / languages: English as an attachment in your email.

The manual is 1,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Acronis disk director suite 10

Acronis disk director suite 10 User Manual - German - 113 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info