624424

Acronis Disk Director 11 Advanced Server Manual

61
Zoom out
Zoom in
Previous page
1/94
Next page
61 Copyright © Acronis, Inc., 2000-2010
whether you are importing all the required disks of the disk group. When importing all the
required disks, all their volumes have the Healthy status. Statuses other than Healthy indicate
that not all of the disks were imported.
For more information on volume statuses please refer to the following Microsoft article:
http ://technet.microsoft.com/en-us/library/cc771775.aspx
2. Click OK to add the pending foreign disks importing operation.
The results of the pending operation are immediately displayed as if the operation had been
performed.
To perform the pending operation you will have to commit it (p. 24). Exiting the program without
committing the pending operations will effectively cancel them.
7.10 Removing a missing disk
The Missing status occurs on a dynamic disk when the disk has been corrupted, turned off, or
disconnected. The Logical Disk Manager (LDM) database keeps information about the missing disk
because such disk might contain parts of dynamic volumes, such as mirrored volumes, that can be
repaired.
If the disk can be reconnected or turned on, all you need to recover its functionality is to reactivate
the disk. For information on how to bring a disk that is offline and missing back online, please refer to
the following Microsoft knowledge base article:
http
.
://technet.microsoft.com/en-
us/library/cc732026.aspx
If the missing disk cannot be reactivated, or you would like to completely delete this disk from disk
group, you can remove the disk from the LDM database.
Before removing a missing disk you have to delete (p. 42) all the volumes on the disk. However, if the disk
contains any mirrored volumes, you can save them using the Remove mirror (p. 47) operation, instead of
deleting the entire volume.
To remove a missing dynamic disk
1. Right-click the disk with the Missing status, and then click Remove missing disk.
2. Click OK to add the pending disk removal operation.
The results of the pending operation are immediately displayed as if the operation had been
performed.
To perform the pending operation you will have to commit it (p. 24). Exiting the program without
committing the pending operations will effectively cancel them.
7.11 Cleaning up a disk
This operation erases all volumes and data on a disk, making it not initialized. All volumes, even those
spanning across other disks, are erased from the disks and the space that was occupied by these
volumes becomes unallocated space. To be able to use the cleared up disk, you need to initialize (p.
54) it once again.
To clean up a disk
1. Right-click the disk you need to clean up, and then click Clean up disk.
2. Click OK to add the pending disk clean up operation.
… 61 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Acronis Disk Director 11 Advanced Server at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Acronis Disk Director 11 Advanced Server in the language / languages: English as an attachment in your email.

The manual is 0,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Acronis Disk Director 11 Advanced Server

Acronis Disk Director 11 Advanced Server User Manual - German - 103 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info