624424

Acronis Disk Director 11 Advanced Server Manual

46
Zoom out
Zoom in
Previous page
1/94
Next page
46 Copyright © Acronis, Inc., 2000-2010
To change a partition type
1. Right-click the volume whose partition type you need to change, and then click Change partition
type.
2. Select the desired partition type from the list—for example, 017h Hidden NTFS, HPFS.
3. Click OK to add the pending partition type changing operation.
The results of the pending operation are immediately displayed as if the operation had been
performed.
To perform the pending operation you will have to commit it (p. 24). Exiting the program without
committing the pending operations will effectively cancel them.
6.14 Setting a volume active
This operation applies to primary volumes on basic MBR disks.
To specify the volume from which the machine will start, you need to set a volume to become active.
A disk can have only one active volume, so if you set a volume as active, the volume, which was
previously active, will be automatically unset.
To set a volume active
1. Right-click the primary volume you want to set as active, and then click Mark as active.
If there is no other active volume in the system, the pending volume setting active operation
volume will be added.
Note: By setting the new volume active, the former active volume letter might be changed and some of the
installed programs might stop running.
2. If another active volume is present in the system, you will receive a warning that the previous
active volume will no longer be active. Click OK in the Warning window to add the pending
volume setting active operation.
Even if you have the operating system on the new active volume, in some cases the machine will not be
able to boot from it. You will have to confirm your decision to set the new volume active.
The results of the pending operation are immediately displayed as if the operation had been
performed.
To perform the pending operation you will have to commit it (p. 24). Exiting the program without
committing the pending operations will effectively cancel them.
6.15 Adding a mirror
Mirrored volumes provide fault tolerance by storing two exact copies of data—called mirrors—on
two different disks.
Adding a mirror to a basic or simple volume means converting that volume to a mirrored volume,
which involves copying the volume's data to another disk.
To add a mirror to a volume
1. Right-click the basic or simple volume to which you want to add a mirror, and then click Add
mirror.
… 46 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Acronis Disk Director 11 Advanced Server at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Acronis Disk Director 11 Advanced Server in the language / languages: English as an attachment in your email.

The manual is 0,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Acronis Disk Director 11 Advanced Server

Acronis Disk Director 11 Advanced Server User Manual - German - 103 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info