624440
105
Zoom out
Zoom in
Previous page
1/248
Next page
105 Copyright © Acronis International GmbH, 2002-2015
The selected disks will be recovered to the physical disks of the machine the console is connected
to. On selecting this, you proceed to the regular disk mapping procedure described below.
New virtual machine
If Acronis Backup Agent for Windows or Agent for Linux is installed.
The selected disks will be recovered to a new virtual machine of any of the following types:
VMware Workstation, Microsoft Virtual PC, Red Hat Kernel-based Virtual Machine (KVM), Red
Hat Enterprise Virtualization (RHEV), or Citrix XenServer Open Virtual Appliance (OVA).
The virtual machine files will be saved to the destination you specify in the Storage section. By
default, the new virtual machine will be created in the current user's documents folder.
If Acronis Backup Agent for Hyper-V or Agent for VMware is installed.
These agents enable creating a new virtual machine on the virtualization server you specify.
By default, the new virtual machine will be created in the default storage of the virtualization
server. Whether you can change the storage on the virtualization server or not, depends on the
virtualization product brand and settings. VMware ESX(i) may have multiple storages. A
Microsoft Hyper-V server enables creating a new virtual machine in any local folder.
The new virtual machine will be configured automatically, the source machine configuration being
copied where possible. The configuration is displayed in the Virtual Machine Settings (p. 139) section.
Check the settings and make changes if necessary.
Then you proceed to the regular disk mapping procedure described below.
Existing virtual machine
Available when the Acronis Backup Agent for Hyper-V or Agent for VMware is installed.
On selecting this, you specify the virtualization server and the target virtual machine. Then you
proceed to the regular disk mapping procedure described below.
Please be aware that the target machine will be powered off automatically before the recovery. If you
prefer to power it off manually, modify the VM power management option.
Disks/volumes
Map automatically
Acronis Backup attempts to map the selected disks to the target disks as described in the "How
the automatic mapping works" (p. 106) section. If you are unsatisfied with the mapping result,
you can re-map disks manually. To do this, you have to unmap the disks in a reverse order; that is,
the last mapped disk should be unmapped first. Then, map the disks manually as described
below.
Disk #:
Disk # (MODEL) (p. 105)
Select the destination disk for each of the source disks.
NT signature (p. 106)
Select the way the recovered disk's signature will be handled. The disk signature is used by
Windows and the Linux kernel version 2.6 and later.
Disk destination
To specify a destination disk:
1. Select a disk where you want the selected disk to recover to. The destination disk's space should
be at least the same size as the uncompressed image data.
105


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Acronis Backup PC 11.7 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Acronis Backup PC 11.7 in the language / languages: English as an attachment in your email.

The manual is 3,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Acronis Backup PC 11.7

Acronis Backup PC 11.7 Installation Guide - English - 16 pages

Acronis Backup PC 11.7 Installation Guide - German - 17 pages

Acronis Backup PC 11.7 User Manual - German - 282 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info