624440

Acronis Backup PC 11.7 Manual

93
Zoom out
Zoom in
Previous page
1/248
Next page
93 Copyright © Acronis International GmbH, 2002-2015
The option enables you to define the commands to be automatically executed before and after data
capture (that is, taking the data snapshot). Data capture is performed by Acronis Backup at the
beginning of the backup procedure.
The following scheme illustrates when the pre/post data capture commands are executed.
<--------------- Backup --------------->
Pre-backup
command
Pre-data
capture
command
Data
capture
Post-data
capture
command
Post-backup
command
If the Volume Shadow Copy Service (p. 97) option is enabled, the commands' execution and the
Microsoft VSS actions will be sequenced as follows:
"Before data capture” commands -> VSS Suspend -> Data capture -> VSS Resume -> "After data
capture" commands.
Using the pre/post data capture commands, you can suspend and resume a database or application
that is not compatible with VSS. As opposed to the Pre/Post commands (p. 91), the pre/post data
capture commands will be executed before and after the data capture process. This takes seconds.
The entire backup procedure may take much longer, depending on the amount of data to be backed
up. Therefore, the database or application idle time will be minimal.
To specify pre/post data capture commands
1. Enable pre/post data capture commands execution by checking the following options:
Execute before the data capture
Execute after the data capture
2. Do any of the following:
Click Edit to specify a new command or a batch file
Select the existing command or the batch file from the drop-down list
3. Click OK.
4.7.18.1 Pre-data capture command
To specify a command/batch file to be executed before data capture
1. In the Command field, type a command or browse to a batch file. The program does not support
interactive commands, i.e. commands that require user input (for example, "pause".)
2. In the Working directory field, specify a path to a directory where the command/batch file will
be executed.
3. In the Arguments field specify the command’s execution arguments, if required.
4. Depending on the result you want to obtain, select the appropriate options as described in the
table below.
5. Click Test command to check if the command is correct.
Check box
Selection
Fail the backup task if the
command execution fails*
Selected
Cleared
Selected
Cleared
Do not perform the data
capture until the command
execution is complete
Selected
Selected
Cleared
Cleared
Result
… 93 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Acronis Backup PC 11.7 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Acronis Backup PC 11.7 in the language / languages: English as an attachment in your email.

The manual is 3,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Acronis Backup PC 11.7

Acronis Backup PC 11.7 Installation Guide - English - 16 pages

Acronis Backup PC 11.7 Installation Guide - German - 17 pages

Acronis Backup PC 11.7 User Manual - German - 282 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info