624431

Acronis Backup PC 11.5 Update 6 Manual

120
Zoom out
Zoom in
Previous page
1/248
Next page
120 Copyright © Acronis International GmbH, 2002-2015
If your operating system and its loader reside on different volumes, always include both volumes in the
backup. The volumes must also be recovered together; otherwise, there is a high risk that the operating
system will not start.
2. Create bootable media.
3. If a system failure occurs, boot the machine using the bootable media. Start the console and
connect to the bootable agent.
4. Create a recovery task (p. 99). In What to recover, make sure that the system disk or volume is
selected for recovery.
Acronis Active Restore will choose for the boot-up and subsequent recovery the first operating system
found during the backup scan. Do not try to recover more than one operating system using Active Restore if
you want the result to be predictable. When recovering a multi-boot system, choose only one system
volume and boot volume at a time.
5. In Where to recover, make sure that the system disk or volume is mapped to the first disk. If it is
not, map it manually as described in "Selecting target disks" (p. 104).
6. In Acronis Active Restore, select Use.
7. Once the system recovery is started, the operating system boots from the backup. The Acronis
Active Restore icon appears in the system tray. The machine becomes operational and ready to
provide necessary services. The immediate user sees the drive tree and icons and can open files
or launch applications even though they were not yet recovered.
The drivers of Acronis Active Restore intercept system queries and set the immediate priority for
recovery of the files that are necessary to serve the incoming requests. While this on-the-fly
recovery proceeds, the continuing recovery process is transferred to the background.
Please do not shut down or reboot the machine until the recovery is completed. If you switch off the
machine, all the changes made to the system since the last boot up will be lost. The system will not be
recovered, not even partially. The only possible solution in this case will be to restart the recovery process
from a bootable media.
8. The background recovery continues until all the selected volumes are recovered, the log entry is
made and the Acronis Active Restore icon disappears from the system tray.
5.5 Bootability troubleshooting
If a system was bootable at the time of backup, you expect that it will boot after recovery. However,
the information the operating system stores and uses for booting up may become outdated during
recovery, especially if you change volume sizes, locations or destination drives. Acronis Backup
automatically updates Windows loaders after recovery. Other loaders might also be fixed, but there
are cases when you have to re-activate the loaders. Specifically when you recover Linux volumes, it is
sometimes necessary to apply fixes or make booting changes so that Linux can boot and load
correctly.
Below is a summary of typical situations that require additional user actions.
Why a recovered operating system may be unbootable
The machine BIOS is configured to boot from another HDD.
Solution: Configure the BIOS to boot from the HDD where the operating system resides.
The system was recovered on dissimilar hardware and the new hardware is incompatible with
the most critical drivers included in the backup
Solution: Boot the machine using bootable media and apply Acronis Universal Restore (p.
113) to install the appropriate drivers and modules.
… 120 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Acronis Backup PC 11.5 Update 6 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Acronis Backup PC 11.5 Update 6 in the language / languages: English as an attachment in your email.

The manual is 3,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Acronis Backup PC 11.5 Update 6

Acronis Backup PC 11.5 Update 6 Installation Guide - English - 16 pages

Acronis Backup PC 11.5 Update 6 Installation Guide - German - 17 pages

Acronis Backup PC 11.5 Update 6 User Manual - German - 280 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info