624431

Acronis Backup PC 11.5 Update 6 Manual

107
Zoom out
Zoom in
Previous page
1/248
Next page
107 Copyright © Acronis International GmbH, 2002-2015
1. If the disk or volume is recovered to its original location, the mapping process reproduces the
original disk/volume layout.
The original location for a disk or volume means exactly the same disk or volume that has been backed up.
A volume will not be considered original if its size, location or other physical parameters have been changed
after backup. Changing the volume letter or label does not prevent the software from recognizing the
volume.
2. If the disk or volume is recovered to a different location:
When recovering disks: The software checks the target disks for size and volumes. A target
disk must contain no volumes and its size must be large enough to place the disk being
recovered. Not initialized target disks will be initialized automatically.
If the required disks cannot be found, you have to map the disks manually.
When recovering volumes: The software checks the target disks for unallocated space.
If there is enough unallocated space, the volumes will be recovered "as is".
If unallocated space on the target disks is less than the size of the volumes being recovered,
the volumes will be proportionally shrunk (by decreasing their free space) in order to fit the
unallocated space. If the shrunk volumes still cannot fit the unallocated space, you have to
map the volumes manually.
5.1.4.2 Selecting target volumes
Available volume destinations depend on the agents operating on the machine.
Recover to:
Physical machine
Available when the Acronis Backup Agent for Windows or Agent for Linux is installed.
The selected volumes will be recovered to the physical disks of the machine the console is
connected to. On selecting this, you proceed to the regular volume mapping procedure described
below.
New virtual machine
If Acronis Backup Agent for Windows or Agent for Linux is installed.
The selected volumes will be recovered to a new virtual machine of any of the following types:
VMware Workstation, Microsoft Virtual PC, Red Hat Kernel-based Virtual Machine (KVM), Red
Hat Enterprise Virtualization (RHEV), or Citrix XenServer Open Virtual Appliance (OVA).
The virtual machine files will be saved to the destination you specify in the Storage section. By
default, the new virtual machine will be created in the current user's documents folder.
If Acronis Backup Agent for Hyper-V or Agent for VMware is installed.
These agents enable creating a new virtual machine on the virtualization server you specify.
By default, the new virtual machine will be created in the default storage of the virtualization
server. Whether you can change the storage on the virtualization server or not, depends on the
virtualization product brand and settings. VMware ESX(i) may have multiple storages. A
Microsoft Hyper-V server enables creating a new virtual machine in any local folder.
The new virtual machine will be configured automatically, the source machine configuration being
copied where possible. The configuration is displayed in the Virtual Machine Settings (p. 139) section.
Check the settings and make changes if necessary.
Then you proceed to the regular volume mapping procedure described below.
… 107 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Acronis Backup PC 11.5 Update 6 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Acronis Backup PC 11.5 Update 6 in the language / languages: English as an attachment in your email.

The manual is 3,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Acronis Backup PC 11.5 Update 6

Acronis Backup PC 11.5 Update 6 Installation Guide - English - 16 pages

Acronis Backup PC 11.5 Update 6 Installation Guide - German - 17 pages

Acronis Backup PC 11.5 Update 6 User Manual - German - 280 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info