624416
7
Zoom out
Zoom in
Previous page
1/13
Next page
7 Copyright © Acronis International GmbH, 2002-2015
Recover a volume of a machine.
Create a centralized vault in a network shared folder.
Back up several machines to the vault.
Back up user profiles to each machine's local folder and replicate the backups to the vault.
Recover a user's documents.
5.1 Preparation
Firewall configuration
Acronis Backup uses TCP port 9876 for installation and for communication between components. The
setup program automatically opens this port through Windows Firewall. If you use a different firewall,
make sure that the port is open for both incoming and outgoing requests through that firewall. You
need to open the port on each machine where you are planning to install Acronis Backup
components.
Domain Name System (DNS) checkup
When you want to register machines with agents on the management server or to connect a console
to a remote machine, you are asked to specify the IP addresses or host names of the machines.
Acronis Backup supports only IPv4 addresses.
In most cases, we recommend that you specify host names. To be able to do this, ensure that the
DNS servers correctly resolve machine names to IP addresses in your network:
1. Go to the machine where you are planning to install the management server (Machine 1). At the
command prompt, type the following command:
hostname
This command returns the Machine 1 host name.
2. Go to one of the machines where you are planning to install the agent (Machine 2). At the
command prompt, type the following command:
nslookup <Machine 1 host name>
If the command output contains the information about Machine 1, it means that the IP address
of Machine 1 is resolved successfully.
3. Repeat step 1 on Machine 2.
4. Repeat step 2 on Machine 1.
If this procedure is successful, it is safe to assume that the DNS name resolution works properly in
your network.
Otherwise, do the following depending on whether static or dynamic IP addresses are assigned to the
machines in the network.
Static IP addresses
Use the hosts file to configure the correspondence between IP addresses and machine names. On
each of the machines where you are planning to install Acronis Backup components, do the
following:
1. Open the file %windir%\system32\drivers\etc\hosts by using any text editor (for example,
Notepad).
2. At the end of the file, add the IP addresses and host names of the machines:
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Acronis Backup Advanced Version 11.5 Update 6 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Acronis Backup Advanced Version 11.5 Update 6 in the language / languages: English as an attachment in your email.

The manual is 0,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Acronis Backup Advanced Version 11.5 Update 6

Acronis Backup Advanced Version 11.5 Update 6 Installation Guide - English - 67 pages

Acronis Backup Advanced Version 11.5 Update 6 User Manual - English - 449 pages

Acronis Backup Advanced Version 11.5 Update 6 Quick start guide - German - 14 pages

Acronis Backup Advanced Version 11.5 Update 6 User Manual - German - 73 pages

Acronis Backup Advanced Version 11.5 Update 6 User Manual - German - 506 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info