624416
212
Zoom out
Zoom in
Previous page
1/449
Next page
212 Copyright © Acronis International GmbH, 2002-2015
Note During the inventorying, do not select the Move newly detected tapes from the 'Unrecognized
tapes' or 'Imported tapes' pools to the 'Free tapes' pool check box.
4. Click Rescan.
5. Select the vault where the newly detected archives will be placed.
6. Select the Unrecognized tapes pool. This is the pool to which most of the tapes are sent as a
result of the fast inventorying. Rescanning the pool associated with the selected vault or the
Imported tapes pool is also possible.
7. Select the tapes to be rescanned. To select all the tapes of the pool, select the check box next to
the Tape name column header.
8. If necessary, select the Enable file recovery from disk backups stored on tapes check box.
Details. If the check box is selected, the software will create special supplementary files on a
hard disk of the machine where the tape device is attached. File recovery from disk backups is
possible as long as these supplementary files are intact. Be sure to select the check box if the
tapes contain single-pass backups (p. 448). Otherwise, you will not be able to recover the
application data from these backups.
9. If the tapes contain a password-protected archive, select the corresponding check box, and then
specify the password for the archive in the Password box. If you do not specify a password, or
the password is incorrect, the archive will not be detected. Please keep this in mind in case you
see no archives after the rescanning.
Tip. If the tapes contain several archives protected by various passwords, you need to repeat the
rescanning several times specifying each password in turn.
10. Click Start to start the rescanning.
Result. The selected tapes are moved to the pool associated with the selected vault. The backups
stored on the tapes can be found in this vault. A backup spread over several tapes will not appear in
the vault until all of these tapes are rescanned.
Inventorying
The inventorying operation detects tapes loaded into a tape device and assigns names to those that
have none. Perform the operation every time you load tapes into the tape device slots.
Inventorying methods
Acronis Backup provides the following two methods of inventorying.
Fast inventorying
Acronis Backup scans tapes for barcodes. Using barcodes, the software can quickly return a tape to
the pool where it was before.
Select this method to recognize tapes used by the same tape device attached to the same machine.
Other tapes will be sent to the Unrecognized tapes pool.
If your tape library contains no barcode reader, all tapes will be sent to the Unrecognized tapes pool.
To recognize your tapes, perform full inventorying or combine fast and full inventorying as described
later in this section.
Full inventorying
212


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Acronis Backup Advanced Version 11.5 Update 6 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Acronis Backup Advanced Version 11.5 Update 6 in the language / languages: English as an attachment in your email.

The manual is 4,14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Acronis Backup Advanced Version 11.5 Update 6

Acronis Backup Advanced Version 11.5 Update 6 Quick start guide - English - 13 pages

Acronis Backup Advanced Version 11.5 Update 6 Installation Guide - English - 67 pages

Acronis Backup Advanced Version 11.5 Update 6 Quick start guide - German - 14 pages

Acronis Backup Advanced Version 11.5 Update 6 User Manual - German - 73 pages

Acronis Backup Advanced Version 11.5 Update 6 User Manual - German - 506 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info