660258
7
Zoom out
Zoom in
Previous page
1/12
Next page
©2017 ACP, Inc.
Cedar Rapids, IA 52404 Page 7 of 12
Part No. 20042803
Revised 03/31/2017
Electronic Control Operation
5. Pause Mode
1) This mode allow users to temporarily stop the cooking
cycle to inspect or stir the food item.
2) While in Time Entry Mode or Preset Program Cook
Mode, if the door is open and closed, or if the key is
pressed, the oven will enter Pause Mode.
3) While paused, LED will display the remaining cooking
time.
4) Pause Mode will expire back to Idle Mode in the exact
fashion as Ready Mode, dependent on User Option 61.
5) Additionally, if the key is pressed, the oven will
immediately enter Ready Mode. If
key is pressed,
the oven will resume the cooking cycle.
6. Time Entry Mode
1) The user may manually enter a cook time and power
level while in this mode.
2) While the oven is in the Ready Mode, pressing the
key will put the oven into Time Entry Mode.
3) During this mode, “00:00” displays.
4) Press , , , or key to
select power level, LED will display the related power.
If the same key is pressed twice, the power will change
to PL10 ( Power Level 10 or full power). If no power
chosen, PL10 is default.
5) During setting process, press
key to enter Time
Entry Mode and begin cooking. Press
key to enter
Ready Mode.
7. Manual Cook Mode
1) This mode allows cooking of the food items. While
in Manual Cook Entry Mode, pressing the
key will
cause to the oven to begin Manual Cook Mode.
2) During this mode, cooking time displays. The fan
operates and oven light is on.
3) When cooking program is nished, the oven will enter
End of Cook Cycle Mode. If you press
key while in
this mode,the oven will enter Pause Mode.
8. End of Cook Cycle Mode
1) After the time has expired in a Manual Cook Mode, or
a Preset Program Cook Mode, the oven will go into The
End of Cook Cycle Mode.
(2) During this mode, “End” displays.
(3) If either User Option OP:11 or OP:12 is selected, the
oven will continue to sound until the user acknowledges
by either opening and closing the door or pressing the
key. User Option OP:10 is the default and after the 3
second beep, the oven will go into Ready Mode.
9. Preset Program Cook Mode
1) This mode allows cooking of food items through a one
key touch operation. While in Ready Mode, pressing a
Number Key on the keypad will cause the oven to run
the Preset Program associated with that key.
2) LED displays the remaining cooking time. If it is multi-
stage cooking, the total remaning cooking time displays
not a particular stage cooking time.
(3) If the program chosen exceeds the maximum time
allowed by User Option 7, then the oven will beep three
times and display 00:00 to indicate the program is
unacceptable.
(4) When the cooking program nishes, the oven will
enter End of Cook Cycle Mode. If you press key
while in this mode, the oven will enter Pause Mode.
Factory Preset Time Settings
Preprogrammed Pad Time:
1 10 sec.
2 20 sec.
3 30 sec.
4 45 sec
5 1 min.
6 1:30 min.
7 2 min.
8 3 min.
9 4 min.
0 5 min.
10. On the Fly Cooking
1) The user may start another cook cycle while the oven
is operating or paused.
2) While the oven is operating or while in the Pause
Mode and if User Option OP:51 is selected pressing a
Number Key will automatically start the preset cooking
program associated with the selected number key.
3) LED displays the remaining cooking time.
4) When cooking program nish, the oven will enter End
of Cook Cycle Mode. If you press key while in this
mode, the oven will enter Pause Mode.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ACP RMS510TS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ACP RMS510TS in the language / languages: English as an attachment in your email.

The manual is 0,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of ACP RMS510TS

ACP RMS510TS User Manual - German - 12 pages

ACP RMS510TS User Manual - Dutch - 12 pages

ACP RMS510TS User Manual - French - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info