660255
6
Zoom out
Zoom in
Previous page
1/12
Next page
©2017 ACP, Inc.
Cedar Rapids, IA 52404 Page 6 of 12
Part No. 20042803
Revised 03/31/2017
Electronic Control Operation
The switching operation of this microwave oven can cause voltage uctuations on the supply line. The operation of this oven under unfavorable voltage
supply conditions can have adverse eects. This device is intended for the connection to a power supply system with a maximum permissible system
impedance Zmax of  at the interface point of the user’s supply. The user has to ensure that this device is connected only to a power
supply system which fullls the requirement above. If necessary, the user can ask the public power supply company for the system impedance at
the interface point.

(2)
(3)
(4)
(5)
(6)
(7)
(2) Power Level Keys
(3) Time Entry Key
(4) Stop/Cancel Key
(5) Start Key
(6) X2 Key
(7) Number Keys
(1)
(1) LED Display
1. Power Up
“-- -- ” displays when the oven is powered up for the rst
time. If key is pressed, the oven will change to Idle
Mode.
 In Idle mode, no key can be pressed.
2. Idle Mode
1)The oven will enter Idle Mode after a set number
of seconds have expired in Ready Mode without a
keypad pressed or without the door being opened and
closed. The default number of seconds is 60 and maybe
changed by resetting User Option 4.
2) During Idle Mode, LED is blank. There will be no oven
activity.
3) Open and close the oven door to exit the Idle Mode
and go into Ready Mode.
3. Ready Mode
1) In this mode, the oven is ready to either begin a
manual or preset cook cycle.
2) Opening and closing the door while the oven is in Idle
Mode will put the oven into Ready Mode.
3) During Ready Mode LED displays “0:00”.
4. Door Open Mode
1) While the door of the oven is open, the oven will
be in Door Open Mode. This allows for entry into
Programming Mode.
2) During this mode, LED is blank, the fan operates and
oven light is on.
3) When the door is opened and closed, if User Option
OP:60 is selected and the oven was running a manual or
preset cook cycle, the oven will enter Pause Mode.
If User Option OP:61 is selected and the oven was
running a manual or preset cooking cycle, opening
and closing the door will clear all preset cook cycle
information.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ACP RMS10DS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ACP RMS10DS in the language / languages: English as an attachment in your email.

The manual is 0,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of ACP RMS10DS

ACP RMS10DS User Manual - German - 12 pages

ACP RMS10DS User Manual - French - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info