660231
12
Zoom out
Zoom in
Previous page
1/17
Next page
12
Digital Dial Operation
Digital Dial option is available on some models only.
The switching operation of this
microwave oven can cause voltage
uctuations on the supply line.
The operation of this oven under
unfavorable voltage supply conditions
can have adverse eects. This device
is intended for the connection to a
power supply system with a maximum
permissible system impedance Zmax
of  at the interface point of
the user’s supply. The user has to
ensure that this device is connected
only to a power supply system
which fullls the requirement above.
If necessary, the user can ask the
public power supply company for the
system impedance at the interface
point.
Oven Wall Clearances
A—Allow at least 2” (5.1 cm) of clearance
around top of oven. Proper air ow around
oven cools electrical components. With
restricted air ow, oven may not operate
properly and life of electrical parts is
reduced.
B—There is not an installation clearance
requirement for the back of the oven.
C—Allow at least 1” (2.54 cm) of clearance
around sides of oven.
D—Install combination oven so oven bottom is
at least 3 feet (91.5 cm) above oor.


So...how do I use it? (Digital Dial)
Heating
1. Open oven door, place food in oven, and close oven door.
2. Turn time entry knob clockwise to desired time.
• Cooking time can be set up to 6 minutes.
• Oven begins operation and time counts down.
3. When cooking time has elapsed, microwave energy stops and oven
signal sounds.
Interrupting Operation
Open oven door to interrupt operation or turn time entry knob
counterclockwise to “0”. To resume microwave oven operation, close oven
door.
If time was changed to “0”, time will need to be reset.
Changing Time and Canceling Mistakes
Heating time can be changed at any time while the oven is operating.
Turn knob to desired new setting. To set cooking time to zero, turn knob
counterclockwise to “0”.
B
A
C

12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ACP RCS511TS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ACP RCS511TS in the language / languages: English as an attachment in your email.

The manual is 2,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of ACP RCS511TS

ACP RCS511TS User Manual - German - 16 pages

ACP RCS511TS User Manual - Dutch - 12 pages

ACP RCS511TS User Manual - French - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info