660251
10
Zoom out
Zoom in
Previous page
1/12
Next page
10
User Options
Changing user options
Changing user options
Options such as single or double pad programming and beep volume can be
changed to suit individual preferences.
To change options:
1. Press and hold pad 2 for approximately 5 seconds.
2. Option appears in display.
Oven is now in options mode.
3. Press number pad that controls option to be changed.
See table below for options.
Current option will display.
4. Press number pad again to change the option.
Each time pad is pressed, option will change.
Match code displayed with code for desired option, then press the
START
pad.
Changes take affect after the start pad is pressed.
To change additional options, repeat steps 3 and 4.
5. Press START
pad to return to Options.
6. Press STOP
to exit.
Didn’t like an option?
Factory settings are marked in bold.
To change the oven back to the factory
setting, simply select the option that is
marked in bold.
Numbered Pads Display Options (Factory Settings in Bold)
1
End of Cycle Beep
OP:10
OP:11
OP:12
3 second continuous beep.
Continuous beep until done disappears.
Repeating 5 beeps bursts until door is opened.
2
Speaker Volume
OP:20
OP:21
OP:22
OP:23
Eliminates beep.
Sets volume to low.
Sets volume to medium.
Sets volume to high.
3
Key Beep
OP:30
OP:31
Prevents beep when pad is pressed.
Allows beep when pad is pressed.
4
Keyboard Enable
Window
OP:40
OP:41
OP:42
OP:43
15 seconds after oven door is closed, keyboard disabled.
30 seconds after oven door is closed, keyboard disabled.
1 minute after oven door is closed, keyboard disabled.
2 minutes after oven door is closed, keyboard disabled.
5
End of Cycle Message
Time
OP:50
OP:51
OP:52
OP:53
OP:55
OP:56
10 seconds
20 seconds
30 seconds
40 seconds
60 seconds
1 minute 10 seconds
6
Stop during
cooking cycle
OP:60
OP:61
OP:62
Pressing stop clears information, opens door.
Pressing stop pauses oven with door closed.
Pressing stop pauses oven with door open.
7
Maximum Cook
OP:70
OP:71
Allows 5 minutes of heating time.
Allows 10 minutes of heating time.
8
Time Entry
OP:80
OP:81
Allows use of preprogrammed pads only.
Allows use of manual time entry and preprogrammed pads.
9
Double Digit Operation
OP:90
OP:91
Allows 10 (0-9) preprogrammed pads.
Allows 100 (00-99) preprogrammed pads.
5 second beeps once.
OP:13
OP:14
OP:15
Continuous beep until stop pad is pressed or door is cycled.
Repeating 5 beeps burst until stop pad is pressed or door is cycled.
OP:57
1 minute 20 seconds
OP:58
1 minute 30 seconds
OP:59
1 minute 40 seconds
Time Entry
OP:16
No beep.
0
ON-THE-FLY Cooking
OP:00
OP:01
Disables ON-THE-FLY Cooking.
Allows ON-THE-FLY Cooking.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ACP OC24 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ACP OC24 in the language / languages: English as an attachment in your email.

The manual is 2,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of ACP OC24

ACP OC24 User Manual - German - 12 pages

ACP OC24 User Manual - French - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info