660240
14
Zoom out
Zoom in
Previous page
1/69
Next page
11
Programming Oven Controls
1. READY must be in the display. If not, open and
close door.
2. Open the oven door completely.
3. Insert USB ash drive.
4. Press and hold the 5 pad until “USB” appears on the
display.
5. To transfer programming FROM the USB ash drive
TO the oven, press the 1 pad.
Or to transfer programming TO the USB ash
drive FROM the oven, press the 2 pad.
6. Push the START pad to begin transfer.
Display will read, “Contacting USB card.”
Display will then read, “Transferring data from
USB to oven,” or vice versa. .
7. Once programming has been successfully
transferred, display will read, “Done - Loaded ___
Programs.”
Shut the door to clear the display and begin
cooking cycle
8. Error codes:
No le: USB ash drive is empty or does not have
the correct le(s) required for operation.
Using the USB Flash Drive
5
Changing User Options
Options such as single and double pad programming or beep volume can be changed
to suit individual preferences.
If oven has just been turned on, door must be opened and closed before
proceeding:
1. Press rmly on hidden pad located to the right of the STOP keypad.
Pad is unmarked
The display remains the same when hidden pad is pressed
2. Press PROGRAM SAVE pad.
The rst user option will display. Oven is now in options mode.
3. Press desired number pad to control changes in options.
See table on next page for options
Current option will display
4. Press the same number pad again to disable or enable the setting.
Each time the pad is pressed the option will change
To change additional options repeat steps 3 and 4
5. Press PROGRAM SAVE to return to READY mode, changes take effect
immediately. To exit without saving, press the STOP pad.
Hidden Key Pad
1
Programming Top &
Bottom Only Cooking
To add a pause to a programmed cook
cycle:
1. Press HIDDEN PAD after entering
time or power level.
2. A short beep sounds. This indicates
the program is set for a mid-cycle
pause.
3. Continue programming pad as
desired.
To remove a pause from a
programmed cook cycle:
1. Press HIDDEN PAD after entering
time or power level.
2. A short beep sounds. This indicates
that the mid-cycle has been
removed.
3. Continue programming as desired.
Mid-Cycle Cooking Pause
Part No. 20152601
Printed in U.S.A. 8/15
Original Instructions
2015 ACP, Inc.
Cedar Rapids, Iowa 52404
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ACP MSO22 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ACP MSO22 in the language / languages: English as an attachment in your email.

The manual is 3,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of ACP MSO22

ACP MSO22 User Manual - German - 14 pages

ACP MSO22 User Manual - French - 14 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info