Manual ACP MMS10TS (page 7 of 12) (English)

660234

Zoom out

Zoom in

1/12

Cedar Rapids, IA 52404 Page 7 of 12

Part No. 20042803

Revised 03/31/2017

Electronic Control Operation

5. Pause Mode

1) This mode allow users to temporarily stop the cooking

cycle to inspect or stir the food item.

2) While in Time Entry Mode or Preset Program Cook

Mode, if the door is open and closed, or if the key is

pressed, the oven will enter Pause Mode.

3) While paused, LED will display the remaining cooking

time.

4) Pause Mode will expire back to Idle Mode in the exact

fashion as Ready Mode, dependent on User Option 61.

5) Additionally, if the key is pressed, the oven will

immediately enter Ready Mode. If

key is pressed,

the oven will resume the cooking cycle.

6. Time Entry Mode

1) The user may manually enter a cook time and power

level while in this mode.

2) While the oven is in the Ready Mode, pressing the

key will put the oven into Time Entry Mode.

3) During this mode, “00:00” displays.

4) Press , , , or key to

select power level, LED will display the related power.

If the same key is pressed twice, the power will change

to PL10 ( Power Level 10 or full power). If no power

chosen, PL10 is default.

5) During setting process, press

key to enter Time

Entry Mode and begin cooking. Press

key to enter

Ready Mode.

7. Manual Cook Mode

1) This mode allows cooking of the food items. While

in Manual Cook Entry Mode, pressing the

key will

cause to the oven to begin Manual Cook Mode.

2) During this mode, cooking time displays. The fan

operates and oven light is on.

3) When cooking program is nished, the oven will enter

End of Cook Cycle Mode. If you press

key while in

this mode,the oven will enter Pause Mode.

8. End of Cook Cycle Mode

1) After the time has expired in a Manual Cook Mode, or

a Preset Program Cook Mode, the oven will go into The

End of Cook Cycle Mode.

(2) During this mode, “End” displays.

(3) If either User Option OP:11 or OP:12 is selected, the

oven will continue to sound until the user acknowledges

by either opening and closing the door or pressing the

key. User Option OP:10 is the default and after the 3

second beep, the oven will go into Ready Mode.

9. Preset Program Cook Mode

1) This mode allows cooking of food items through a one

key touch operation. While in Ready Mode, pressing a

Number Key on the keypad will cause the oven to run

the Preset Program associated with that key.

2) LED displays the remaining cooking time. If it is multi-

stage cooking, the total remaning cooking time displays

not a particular stage cooking time.

(3) If the program chosen exceeds the maximum time

allowed by User Option 7, then the oven will beep three

times and display 00:00 to indicate the program is

unacceptable.

(4) When the cooking program nishes, the oven will

enter End of Cook Cycle Mode. If you press key

while in this mode, the oven will enter Pause Mode.

Factory Preset Time Settings

Preprogrammed Pad Time:

1 10 sec.

2 20 sec.

3 30 sec.

4 45 sec

5 1 min.

6 1:30 min.

7 2 min.

8 3 min.

9 4 min.

0 5 min.

10. On the Fly Cooking

1) The user may start another cook cycle while the oven

is operating or paused.

2) While the oven is operating or while in the Pause

Mode and if User Option OP:51 is selected pressing a

Number Key will automatically start the preset cooking

program associated with the selected number key.

3) LED displays the remaining cooking time.

4) When cooking program nish, the oven will enter End

of Cook Cycle Mode. If you press key while in this

mode, the oven will enter Pause Mode.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of ACP MMS10TS in the language / languages: English as an attachment in your email.

The manual is 0,66 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of ACP MMS10TS

ACP MMS10TS User Manual - German - 12 pages

ACP MMS10TS User Manual - French - 12 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

ACP MMS10TS Manual

Product: