660233
11
Zoom out
Zoom in
Previous page
1/17
Next page
11
User Options (Electronic Control)
Changing user options
Options such as single or double key programming, beep volume, and
maximum cooking time can be changed to suit individual preferences.
To change options:
1. Open oven door.
• If door is closed or STOP/RESET key is pressed before programming is
complete, changes are discarded and microwave exits programming
mode.
2. Press and hold key 2 for approximately 5 seconds.
• This begins options mode.
Microwave will beep and 0P: -- displays. Microwave is now in
programming mode.
3. Press number key that controls option to be changed.
• See table below for options.
• Current option will display.
4. Press number key again to change the option.
• Each time key is pressed, option will change.
• Match number code displayed with descriptions for desired option.
5. Press START key to save changes.
0P: -- shows in display.
• To change additional options, repeat steps 3 and 4.
• Changes appear after door is closed or STOP/RESET pad is pressed.

Factory settings are marked in bold.
To change the oven back to the
factory setting, simply select the
option that is marked in bold.


In order for any changes to
be saved, the START key
must be pressed after selecting an
option. Shutting the oven door or
pressing the STOP/RESET key will
not save changes.
Numbered Keys Display Options (Factory Settings in Bold)
1
End of Cycle Beep
OP:10
OP:11
OP:12
3 second continuous beep.
Continuous beep until door is opened.
5 beeps bursts until door is opened.
2
Key Beep Volume
OP:20
OP:21
OP:22
OP:23
Eliminates beep.
Sets volume to low.
Sets volume to medium.
Sets volume to high.
3
Key Beep
OP:30
OP:31
Prevents beep when key is pressed.
Allows beep when key is pressed.
4
Active Display
OP:40
OP:41
OP:42
OP:43
15 seconds after oven door is opened, keyboard disabled.
30 seconds after oven door is opened, keyboard disabled.
1 minute after oven door is opened, keyboard disabled.
2 minutes after oven door is opened, keyboard disabled.
5
On-the-Fly Cooking
OP:50
OP:51
Prevents different pre-programmed keys to be activated during cooking.
6
Reset to Ready Mode
OP:60
OP:61
Opening oven door does not reset oven back to ready mode.
7
Maximum Heating Time
OP:70
OP:71
Allows 60 minutes of heating time.
Allows 10 minutes of heating time.
8
Manual Operation
OP:80
OP:81
Allows use of preprogrammed keys only.
Allows use of manual time entry and preprogrammed keys.
9
Double Digit Operation
OP:90
OP:91
Allows 10 (0-9) preprogrammed keys.
Allows 100 (00-99) preprogrammed keys.
Allows different pre-programmed keys to be activated during cooking.
Opening oven door resets oven back to ready mode.
0
Clean Filter Message
OP:00
OP:01
OP:02
OP:03
Oven will not display Clean Filter
Oven will display Clean Filter every seven (7) days
Oven will display Clean Filter every thirty (30) days
Oven will display Clean Filter every ninety (90) days
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ACP MFS18TS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ACP MFS18TS in the language / languages: English as an attachment in your email.

The manual is 2,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of ACP MFS18TS

ACP MFS18TS User Manual - German - 16 pages

ACP MFS18TS User Manual - French - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info