660215
6
Zoom out
Zoom in
Previous page
1/15
Next page
6
Display and Features (cont’d)
Start pad
The Start pad is used
to begin a manual time
entry cooking cycle.
Temperature warnings
The combination oven has two
distinct temperature warnings.
Warnings sound with a three beep
signal when a programmed pad is
pressed. Warnings are:
A warning when the preheat
temperature does not match the
preprogrammed temperature of
a cooking condition.
A warning when the actual
oven cavity temperature is
not to preheat temperature,
such as when the oven is rst
started.
To override the warning and begin
a cooking cycle, press the Start
pad. To turn off warnings, see
User Options section.
Stop/Reset pad
The Stop/Reset pad
stops a cooking
sequence in progress,
clears out any remaining time,
and also ends a programming
or user option cycle. When the
Stop/Reset pad is used to end a
programming or option change,
the changes are discarded.
Cooking Display
DISPLAYS DESCRIPTION
OVEN PREHEATING
475°F
Oven Preheating 475°F or 250°C displays
when oven is turned on and is warming up to the
selected preheat temperature. Oven Preheating
also ashes when a cooking condition can be
started or programmed.
READY
475°F
Ready 475°F or 250°C displays when oven has
reached preheat temperature and is ready to cook.
Ready also ashes when a cooking condition can
be started or programmed.
Note: Oven will shutdown after two hours of
inactivity.
00:00
Displays cooking time. If stage cooking is
programmed, total cooking time is displayed
.
MW 50%
MW 50% displays the current microwave power
level. 100% is the highest setting, and 0% is lowest
(no microwave energy used).
ITEM-05
ITEM-05 displays the single or double digit entry
of a programmed cooking condition when using a
programmed pad.
STAGE 1
Stage 1 displays the stage number (1 through 4)
the oven is at in the cooking condition
.
STANDBY
STANDBY displays when oven is turned off,
and also after the oven is plugged in, the door is
opened, and then shut.
Programming Display
DISPLAYS DESCRIPTION
Enter Program
to Add/Review:
Displays when oven is in programming mode for
single digit or double digit memory.
STAGE 1
Displays stage number during cooking or when
programming a specic cooking stage. Stage
number (1 through 4) indicates the stage that is
being used.
USB Display
DISPLAYS DESCRIPTION
USB
Displays when keypad 5 is pressed and held and
transfer to or from USB ash drive is ready
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ACP JET5193 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ACP JET5193 in the language / languages: English as an attachment in your email.

The manual is 2,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of ACP JET5193

ACP JET5193 User Manual - German - 15 pages

ACP JET5193 User Manual - Dutch - 15 pages

ACP JET5193 User Manual - French - 15 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info