660212
12
Zoom out
Zoom in
Previous page
1/15
Next page
12
To program the oven using the USB Flash Drive:
Oven must be in Standby mode (Preheat must be OFF)
Note: A standard USB ash drive is compatible with oven.
1. Remove protective cover from bottom of vertical keypad.
2. Insert the USB Flash Drive into the slot located below the vertical keypad.
3. Open the oven door.
4. Press and hold the 5 pad until USb appears in the display.
5. To transfer programming FROM the USB ash drive to the oven, press the 1 pad. “USb TO OVEN”
will appear in display.
OR
To transfer programming TO the USB ash drive from the oven, press the 2 pad. “OVEN TO USb” will
appear in display.
6. Press START pad , on vertical keypad to begin transfer.
7. Oven displays “LOADING” in the display for approximately 10 seconds.
8. When the transfer is complete the display will beep and display “Done” and number of programs
saved.
9. Press any pad to clear the display or shut the door and the display will read “READY”.
Error Codes:
1. NO USb: Remove ash drive from USB and reinsert ash drive into USB and retry.
2. RESET OVEN: Unplug oven from outlet and plug in oven and retry transfer.
USB Flash Drive Operating Instructions
USB Port
PROGRAM SAVE
TURN PREHEAT OFF
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ACP JET19 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ACP JET19 in the language / languages: English as an attachment in your email.

The manual is 2,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of ACP JET19

ACP JET19 User Manual - German - 15 pages

ACP JET19 User Manual - Dutch - 15 pages

ACP JET19 User Manual - French - 15 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info