660197
32
Zoom out
Zoom in
Previous page
1/36
Next page
30
To program the oven using the EZCard:
Oven must be in Standby mode (Preheat must be OFF)
1. Remove protective cover from bottom of vertical keypad.
2. Insert the EZCard into the slot located below the vertical keypad.
The EZCard can be inserted forwards or backwards.
3. Press and hold the Program Save pad for 3 seconds.
AUTO , then PROG displays briey, repeating this sequence
every second as the EZCard automatically programs the oven.
When the oven programming is complete, DONE shows in
the display for 3 seconds and the oven beeps.
The oven resets to the standby mode.
4. Remove the EZCard.
The oven programming is now complete.
5. Place protective cover back over slot in bottom of control panel.
EZCard slot
EZCard
NOTE: If 00:00 displays, 3 beeps
sound and the display returns to the
Standby mode, the EZCard was not
detected.
Reinsert the EZCard into the slot and
try each step again.
If after several attempts, the EZCard
is still not detected, contact Amana
ComServ Service Support.
Inside the U.S.A. or Canada, call
toll-free at 866-426-2621.
Outside the U.S.A. and Canada,
call 319-368-8120.
Email:
commercialservice@amana.com.
Caution:
DO NOT REMOVE EZCard while programming. Removing card during
programming can cause the oven’s keypad to freeze up.
To order additional EZCards,
call the Amana Commercial
Inside Sales Team toll-free at
866-426-2621 (U.S.A. or
Canada), or 319-368-8120
(outside the U.S.A. and
Canada).
To transfer programming from the oven to the EZCard:
Oven must be in Standby mode (Preheat must be OFF)
1. Remove protective cover from bottom of vertical keypad.
2. Insert the EZCard into the slot located below the vertical keypad.
The EZCard can be inserted forwards or backwards.
3. Press the Program Save pad.
4. Press the START pad.
5. Press the 1 pad, the 3 pad, and then the 5 pad.
The programming transfer will begin automatically and the display will show moving dashes.
When the programming transfer is complete,
DONE shows in the display for 3 seconds and the oven beeps.
The oven resets to the standby mode.
6. Remove the EZCard.
The programming transfer is now complete.
7. Place protective cover back over slot in bottom of control panel.
STOP!STOP!
Use this option only to transfer data from the oven TO the
EZCard. This will overwrite all programming on the EZCard!
Update
programs in
seconds!
EZCard Operating Instructions (some models)
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ACP ACE5140 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ACP ACE5140 in the language / languages: English as an attachment in your email.

The manual is 6,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of ACP ACE5140

ACP ACE5140 User Manual - German - 15 pages

ACP ACE5140 User Manual - French - 15 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info