541321
32
Zoom out
Zoom in
Previous page
1/39
Next page
6. Make sure to click the "Open Mixer" button and double check that the correct source is not
muted. Double check the recording settings. Click "Properties" from the "Options" menu.
Select "Recording" and click "OK". Make sure that the correct source is selected. Normally,
the correct source would be "Line In" or "Analog Mix".
It's not recognizing the tracks correctly
After recording, the Preview & Edit Screen comes up and, by default, automatically chops the
recording up into multiple tracks, if possible.
If the tracks are not being recognized properly, it could be a variety of problems.
1) Make sure you are recording with a good level. Weak recordings look more like a horizontal
line.
Example of a weak recording level:
Example of a strong recording level:
If you have a recording that looks like the weak recording image, try running the Recording
Level Adjustment Wizard to get a better recording level.
2) Try adjusting the auto track analysis parameters.
Click "Analyze" and then change the following parameters to try and better recognize the
recording.
Consider It A Track When
The following parameters will help determine if audio is silence, garbage or a track.
The volume is greater than X % - (Music Threshold)
If the volume is greater than X %, we consider it signal/music and not record or tape noise.
Since recordings are not perfectly silent, this is a threshold that can be used to help separate
noise from music. (The default is 10%)
It is longer than X minute(s)
If the software detects music signal and not noise (see above) for X minutes, it will consider it a
track. This helps eliminate false tracks such as record scratches, tape clicks and so on. (The
default is 1/2 minute or 0.50 minutes.)
It is separated by at least X seconds of 'silence'
Page 32 of 39Spin It Again
7/10/2007file://C:\acoustica\vin
y
lman\hel
p
\flat\s
p
inita
g
ain.htm
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Acoustica Spin It Again at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Acoustica Spin It Again in the language / languages: English as an attachment in your email.

The manual is 0,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info