541322

Acoustica Mixcraft-5 Manual

109
Zoom out
Zoom in
Previous page
1/115
Next page
My CD/DVD Recorder Is Not Supported!
Mixcraft supports three burning engines: Primo, Goldenhawk and IMAPI.
The default and preferred engine is Primo which works on XP, Vista and above. It will burn on the fly, burn CD Text
and supports gap-less tracks.
If you are using Windows XP or Windows Vista, you can use the built in IMAPI burning engine. The draw back to
IMAPI is that it burns two second gaps between tracks on the burned CD.
Goldenhawk
Goldenhawk will burn on the fly and burns without gaps between tracks on the burned CD. Unfortunately,
Goldenhawk does not support as many CD and DVD writers. However, there is some hope.
Since many drives are clones and use the same basic technology, they also share the command system that instructs
the CD and DVD writers what to do. With that in mind, you can try different drive definitions to see if they work with
your drive.
Go into the CD Burning Preferences, make sure that Goldenhawk is selected and then click the Goldenhawk Drive
Override... button. This brings up some options for your unsupported devices. Choose the unsupported drive from
the drop down Select A Drive. First try the Use A Generic CD Writer Drive and then click OK. Restart the software to
see if it's supported by trying a test burn. If that doesn't work, go back into the Goldenhawk Override dialog and try
Use The Driver For This Drive Type option. Select a drive that sounds similar to your drive. Consult the web to find
out what type of drive it could be cloned from. Try a drive with the same manufacturer but at a slower speed, etc.
Note that it is not guaranteed to work, but this is an option to try.
Otherwise, switch to Primo or IMAPI mode if you are using XP or Vista.
I Am Getting Burn Failures
Here are some suggestions to troubleshoot a burn failure.
• Try a burn in 'Test Mode' first.
• Try a different blank CD (Make sure it's not full or scratched)
• Try a different blank CD from a different manufacturer.
• Shut down other programs and temporarily shut down your virus checker during a burn. ( Shutting down your
virus checker should be done at your own risk. Make sure you are not connected to the Internet and have
done a full virus scan recently.)
• Try burning at a slower speed, especially if your CD recorder does not have 'Burn Proof'.
• Try checking the option to 'Convert To WAV First.'
• If you have more than one CD or DVD recorder, try switching to the other recorder on the burn CD window.
• If you have Windows XP or Vista, try switching to IMAPI.
• Try switching to a different burning engine. Choose between Primo (recommended), Goldenhawk and IMAPI.
• Try burning a short sound just to verify that CD recorder can still burn and is not defective.
• Try burning with another program such as Windows Media Player to verify that your CD recorder is not
defective or having some kind of system conflict.
How Do I Get Rid Of The Two Second Gap Between Tracks On My Burned CD?
In Primo or Goldenhawk mode, audio CDs will not have a two second gap between tracks.
However, if you are burning in IMAPI mode, you are forced by the IMAPI system to have a two second gap between
tracks.
There are two options:
… 109 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Acoustica Mixcraft-5 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Acoustica Mixcraft-5 in the language / languages: English as an attachment in your email.

The manual is 1,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info