541322
34
Zoom out
Zoom in
Previous page
1/115
Next page
Once you are satisfied with the loop, you can extend the clip in the session area to loop it as many times as you'd
like. See Looping Sounds.
M.I.D.I. Primer
M.I.D.I. stands for Musical Instrument Digital Interface. It is simply a series of messages that keyboards and
synthesizers use to play notes or change the sound of a synthesizer. A Virtual Instrument Track in Mixcraft contains
Virtual Instrument Clips, which contain MIDI data.
MIDI Notes
When you play the middle C key on a music keyboard, it sends a short message that translates to 'play middle C'.
When you let go of the key, a message is sent that translate to 'stop playing middle c'. In addition, the message
contains other information, such as the MIDI channel and key velocity. There are 16 MIDI channels which allow you
to route MIDI messages. The key velocity is a number from 1 to 127 which describes how fast the key was
depressed. A velocity of 1 would hardly be heard and a velocity of 127 would be full volume.
Each MIDI Note message contains the following information: Note Value (C0 - C10), Key Velocity (1-127), MIDI
Channel (1-16)
Note Value
This is the value of the note. There are 128 possible MIDI notes. Note 0 corresponds to 'C0', where 'C' means the
note C and '0' means octave 0. Note 127 corresponds to G10. A normal eight octave MIDI piano keyboard has a
range from A1 to C9.
Key Velocity
This is how fast the key was pressed. Faster velocities usually corresponds to louder sounds or may trigger extra
sounds, depending on the synthesizer.
MIDI Channel
This is the channel that the note is on. MIDI channels allow you to route specific channels to specific synthesizers
and/or tracks.
MIDI Controllers
A controller is another type of MIDI message that controls other parameters. The most commonly used controllers are
Modulation and Pitch Wheel. A standard MIDI piano keyboard has two wheels that correspond to modulation and
pitch wheel (pitch bend).
Modulation
This is also known as vibrato and will usually cause the pitch to oscillate around the note. However, it depends on the
synthesizer being used. Modulation has a value of 0 to 127 (127 is the most extreme modulation).
Pitch Wheel (Pitch Bend)
This controller usually bends the pitch up or down a half step in pitch. However, it depends on the synthesizer being
used. Pitch wheel or pitch bend has a value from -8191 to 8192.
Other Controllers
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Acoustica Mixcraft-5 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Acoustica Mixcraft-5 in the language / languages: English as an attachment in your email.

The manual is 1,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info