Manual Acoustica Mixcraft-4 (page 87 of 93) (English)

541323

Zoom out

Zoom in

1/93

instead of something general like "stereo mix," "what you hear" or "digital wave." For example, if your recording

source is a microphone, choose "microphone." If you're recording from your computer's Line In input, choose that.

To choose your recording source in Mixcraft, click on the small down arrow that appears to the right of the arm

button on the track you want to use for recording. First, choose the sound device you want to use (you may only

have one choice), and you'll see a sub menu with a Stereo Source option.

gain, if you're already have a specific source selected, your microphone could be picking up the sound from your

speakers. Try turning off your speakers and using headphones to monitor the audio!

How Can I Hear Effects During Recording?

Some sound cards or USB devices have a way to monitor the live recording independent of Mixcraft. However, if

you'd like to hear the effects during recording, you'll need to disable the sound device's monitoring and use

Mixcraft's monitoring system. For example, if you are making a weird recording of your voice and would like to

hear the echo or delay while recording, you'll need to turn on monitoring. You'll need to enable Mixcraft's

monitoring and disable any sound card's built in monitoring.

To turn on Mixcraft's monitoring, click the Monitor Incoming Audio option on the armed track. Note that you may be

fighting latency versus non-gapping audio by enabling monitoring.

To turn off the sound card's built in monitoring, you may need to go into the Window's audio mixer and go the

playback section and click the advanced button (if it's there) to disable it.

My CD/DVD Recorder Is Not Supported!

Mixcraft supports two burning engines: Goldenhawk and IMAPI. If you are using Windows XP or Windows Vista,

you can use the built in IMAPI burning engine. The draw back to IMAPI is that it burns two second gaps between

tracks on the burned CD.

Goldenhawk is preferred because it is faster, will burn on the fly and burns without gaps between tracks on the

burned CD. Unfortunately, Goldenhawk does not support as many CD and DVD writers. However, there is some

hope.

Since many drives are clones and use the same basic technology, they also share the command system that

instructs the CD and DVD writers what to do. With that in mind, you can try different drive definitions to see if they

work with your drive.

Go into the CD Burning Preferences, make sure that Goldenhawk is selected and then click the Goldenhawk Drive

Override... button. This brings up some options for your unsupported devices. Choose the unsupported drive from

the drop down Select A Drive. First try the Use A Generic CD Writer Drive and then click OK. Restart the software

to see if its supported by trying a test burn. If that doesn't work, go back into the Goldenhawk Override dialog and

try Use The Driver For This Drive Type option. Select a drive that sounds similar to your drive. Consult the web to

find out what type of drive it could be cloned from. Try a drive with the same manufacturer but at a slower speed,

etc. Note that it is not guaranteed to work, but this is an option to try.

Otherwise, switch to IMAPI mode if you are using XP or Vista.

I Am Getting Burn Failures

Here are some suggestions to troubleshoot a burn failure.

z Try a burn in 'Test Mode' first.

Page 87 of 93Mixcraft 4

2/7/2008file://C:\acoustica\mixcraft\hel

\flat-manual\mixcraft.htm

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Acoustica Mixcraft-4 in the language / languages: English as an attachment in your email.

The manual is 1,17 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Acoustica Mixcraft-4 Manual

Product: