541323
68
Zoom out
Zoom in
Previous page
1/93
Next page
Default Input (Recording)
Choose the default sound device from which to record audio. Please note that on Vista, you may need to make
sure the device is on and plugged in, otherwise it may not show up.
Default Output (Playback)
Choose the sound device from which to play audio. Please note that on Vista, you may need to make sure the
device is on and plugged in to the speakers, otherwise it may not show up.
Sample Rate
Choose a sample rate for both recording and playback. 44100 is the default for CD quality. Mixcraft supports
sample rates up to 192000, if your sound card supports it.
Bit Depth
This is the number of bits per sample. 16 is the default for CD quality. Mixcraft supports bit depth of 24 bit for ultra
high quality. Only use 8 bit if you have to (8 bit sounds very noisy).
Number Of Buffers
This is the number of audio buffers to pre-mix before starting playback. The number of buffers will determine the
latency. More buffers lead to higher latency. Fewer buffers lead to lower latency but possible audio gapping.
Buffer Size
The size of the buffer also determines the latency of the software. Larger buffers lead to higher latency. Choosing
different buffer sizes may help the software work better with your sound card or sound device. Smaller buffers lead
to lower latency but also possible audio gapping.
Open Mixer...
This button opens the Window's mixer to allow you to configure the inputs or recording levels for your sound
devices.
ASIO Preferences
These are the preference options if ASIO mode is selected on the Sound Device Preferences. ASIO is an
alternative driver system that allows for lower latency and better synchronization between playback and recording.
Tip: Always make sure that you have the latest drivers for your sound device or sound card. Visit your sound
device or sound card manufacturer's website.
Default Input (Recording)
Choose the default sound input to record audio from. Please note that on Vista, you may need to make sure the
device is on and plugged in, otherwise it may not show up.
Default Output (Playback)
Choose the sound output to play audio from. Please note that on Vista, you need to make sure the device is on
and plugged in to speakers, otherwise it may not show up.
ASIO Device
Choose the default ASIO Device to record from. ASIO only allows for one device at a time.
Open Mixer...
This button opens the ASIO mixer for the ASIO Device and allows you to choose the latency settings and other
more advanced settings. (The ASIO mixer is made by a 3rd party and will look different depending on what type of
sound device you have.)
WaveRT Preferences
Page 68 of 93Mixcraft 4
2/7/2008file://C:\acoustica\mixcraft\hel
p
\flat-manual\mixcraft.htm
68


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Acoustica Mixcraft-4 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Acoustica Mixcraft-4 in the language / languages: English as an attachment in your email.

The manual is 1,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info