541323

Acoustica Mixcraft-4 Manual

49
Zoom out
Zoom in
Previous page
1/93
Next page
A
lternatively, you can click the Track button followed by clicking Mute (Ctrl+M) or by right clicking on the track
header and selecting Mute.
Track Effects
Each track has it's own effects which are applied to all sounds on the track. Learn more about editing effects here.
Arming A Track For Recording
A
rming a track simply means that you are preparing it for recording. When you arm a track, you are instructing the
software that you want to record on that track.
To arm a track, click the Arm button on a track header.
Once a track is armed, it will highlight in red.
Choosing Recording Input
You can record from multiple sound cards and different inputs at the same time. Some specialty sound devices
allow you to record on multiple inputs at a time. Typical sound cards usually only have one stereo input with one
source.
On the track header, click the little arrow on the Arm button.
This brings up a list of sound devices, followed by inputs. In the following example, it shows one device.
(Conexant HD Audio).
For those that wish to record a mono signal, click the sound device followed by clicking Left or Right depending on
where you've plugged in your device.
Choosing A Recording Source
When you are using the Wave driver system (the default), and you are using a standard Window's sound card, you
will also have the choice of choosing which mixer source to record from. Typical choices are microphone, wave
out mix, line in and auxiliary. Click the arm arrow, select your sound device and then choose Stereo Source.
You can alternatively choose a recording source by going to your Window's mixer and choosing a source. Hint:
Click the Window's Start button followed by choosing Run.. Type in sndvol32 -r and adjust your source control.
Setting A Recording Level
In Wave mode, you can set the recording level of the armed track. When you arm a track, the volume slider turns
into a red recording level adjuster. This is not an option in ASIO mode due to the way that ASIO drivers work.
However, if it is a typical sound card, you can adjust the recording level by opening the Window's audio mixer, by
clicking the Window's Start button followed by choosing Run.. Type in sndvol32 -r and adjust your source control
recording levels.
A
fter disarming the track, the slider restores to its original setting.
Page 49 of 93Mixcraft 4
2/7/2008file://C:\acoustica\mixcraft\hel
p
\flat-manual\mixcraft.htm
… 49 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Acoustica Mixcraft-4 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Acoustica Mixcraft-4 in the language / languages: English as an attachment in your email.

The manual is 1,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info