541323

Acoustica Mixcraft-4 Manual

37
Zoom out
Zoom in
Previous page
1/93
Next page
you can use them to create filter sweeps, by adding resonance while the cutoff frequency moves up or down. The
cutoff frequency and resonance amount are each controlled via an envelope, and these values can change over
time, in the same way a volume or pan envelope can be used to change to volume and pan amount over time.
How To Edit A Low Pass Filter
To edit a sound's low pass filter cutoff, go to the toolbar and make sure that Low Pass Cutoff is selected. By
default, all points on this envelope are at 100%, meaning that all sounds below the cutoff (i.e. everything) can be
heard. Adding points lower than 100% will cause high frequencies to be increasingly removed from the audio.
To edit a sound's low pass filter resonance, go to the toolbar and make sure that Low Pass Resonance is
selected. By default, all points on this envelope are at 0%, meaning that there is no resonance/emphasis at the
cutoff point. Adding points higher than 0% will cause emphasis at the cutoff frequency, if any frequencies exist at
and around that frequency.
What Is A High Pass Filter?
A
high pass filter is the exact opposite of a low pass filter, meaning that high frequencies above the cutoff point are
allowed to pass, while frequencies below the cutoff point are reduced or removed.
The high pass filter in Mixcraft is also a resonant filter.
How To Edit A High Pass Filter
To edit a sound's high pass filter cutoff, go to the toolbar and make sure that High Pass Cutoff is selected. By
default, all points on this envelope are at 0%, meaning that all sounds above the cutoff (i.e. everything) can be
heard. Adding points above 0% will cause low frequencies to be increasingly removed from the audio.
To edit a sound's high pass filter resonance, go to the toolbar and make sure that High Pass Resonance is
selected. By default, all points on this envelope are at 0%, meaning that there is no resonance/emphasis at the
cutoff point. Adding points higher than 0% will cause emphasis at the cutoff frequency, if any frequencies exist at
and around that frequency.
What Famous Examples Of Music Have This Effect?
Many songs in many genres take advantage of resonant filter sounds. The opening note to the Rush song Tom
Sawyer contains a famous resonant low pass filter sweet of a synthesizer sound. Many dance songs begin with a
low pass filter whose cutoff frequency is slowly rising, so the song starts off muted and suddenly is full and bright.
Time Stretching Sounds (FlexAudio™)
Time travel may not be possible yet, but you can change the speed of a sound without changing its pitch. :) In the
past, changing the speed or playback rate of a sound resulted in changing the pitch, also known as the dreaded
"chipmunk" effect.
Time Stretching Sounds
Each sound can be time stretched with or without changing its pitch.. A sound can be adjusted by 25% to 400%
which would result in a sound four times as fast or four times as slow. You can visually time stretch a sound with
FlexAudio™, described below. Otherwise, click on the Sound Details Tab on the bottom and select the sound you
are interested in adjusting.
Make sure to switch the sound from Adjust To Project Tempo to Time Stretch By mode, if its not already in that
mode.
A
djust the sound to the desired percentage. Setting it to 50% would cause the sound to be 1/2 the size and
playback two times as fast.
If you want the sound's tempo to slow or speed up over time or beat match, you should change the sound's mode
Page 37 of 93Mixcraft 4
2/7/2008file://C:\acoustica\mixcraft\hel
p
\flat-manual\mixcraft.htm
… 37 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Acoustica Mixcraft-4 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Acoustica Mixcraft-4 in the language / languages: English as an attachment in your email.

The manual is 1,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info