471501

Acoustic energy Radiance Sub Manual

4
Zoom out
Zoom in
Previous page
1/8
Next page
Page 2
Diagram One 6. Controls and System Setup
The Aegis Neo Subwoofer requires connection both to mains power and an
appropriate audio signal. The connection sockets are located on the back panel
illustrated opposite in Diagram Two. Leave the subwoofer switched-off at the
mains until all connections are made and ensure that the Volume Level control,
also located on the back panel, is turned fully anti-clockwise. Connecting your
Aegis Neo Subwoofer to an audio signal is a simple process, however, there are
some choices to be made concerning connection mode.
Signal Input Connections
Aegis Neo Subwoofer is fitted with an unfiltered mono AV Subwoofer Line Input
and a standard stereo pair of filtered Line Inputs.
The AV Subwoofer Line Input is intended for connection to an audio-visual
processor LFE (low frequency effects) output. As the LFE output of audio-visual
processors is already low-pass filtered, the subwoofer’s crossover filter is bypassed
by the AV Subwoofer Line Input. The Crossover Frequency control has no effect on
signals connected to the AV Subwoofer Line Input.
The stereo Line Inputs are intended for connection to preamplifier or other similar
line outputs. The left and right inputs are combined to mono within the subwoofer.
Connect to the input sockets using an appropriate RCA Phono connection cable.
Ensure that the cable is of good quality.
Signal Output Connections
RCA Phono Line Level signal output sockets are fitted to the Aegis Neo Subwoofer.
They carry an output signal identical to the input signal and may be used to
transfer the signal back to a power amplifier or to connect multiple subwoofers.
Mains Connection
After checking that the mains voltage specified on
the subwoofer rear panel is set correctly, connect
the subwoofer via its IEC mains input to a mains wall
socket. Use only the mains cable supplied with the
subwoofer.
Left
Front
Viewing/listening position
Right
Front
Centre
Left
Surround
Right
Surround
Alternative
or Extra Left
Surround
Alternative or
Extra Right
Surround
Sub-woofer
5. Connecting
VOLUME
LEVEL
CROSSOVER
FREQUENCY
PHASE
NOTCH
FREQUENCY
NOTCH
SLOPE
NOTCH
LEVEL
POWER
OFF
ON
AUTO
AV SUBWOOFER LINE-IN
LINE IN RIGHT
LINE OUT RIGHT
LINE IN LEFT
LINE OUT LEFT
MIN MAX 30Hz 150Hz
60Hz 120Hz
90Hz
MIN MAX
0dB -12dB
-3dB -9dB
-6dB
45Hz 150Hz
75Hz 135Hz
105Hz
0° 180°
45° 135°
90°
Designed and Engineered by
Acoustic Energey Ltd., England
Made in Malaysia
S U B W O O F E R
200 Watt Active Subwoofer
Serial Number
AE2308
No user
serviceable parts
inside.
Consult Owners
Manual before use.
Operate in
accordance with
Manufacturer’s
instructions.
If in doubt refer to
qualifi ed service
personnel.
Not suitable for
wall mounting.
POWER INPUT
115-120/230-240V
50/60Hz
INPUT POWER: 90W
ATTENTION
Risque du choc electrique.
Ne pas ouveré.
CAUTION
Risk of electric shock.
Do not open.
FUSE
230-240V : T1.6AL 250V
115-120V : T3.15AL 250V
MAINS
VOLTAGE
SELECTOR
230-240V
50/60Hz
115-120V
AM023-08-06
Diagram Two
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Acoustic energy Radiance Sub at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Acoustic energy Radiance Sub in the language / languages: English as an attachment in your email.

The manual is 1,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info