471484
2
Zoom out
Zoom in
Previous page
1/8
Next page
Page 2
4. Neo Three Installation
2. Handling
Thank you for purchasing this Acoustic Energy product. As a valued customer
we would like to keep you up to date with all news and events including new
products, exhibitions and exclusive promotions. To enable us to communicate
these exciting developments please go to our website - www.acoustic-energy.
co.uk - and complete the ownership registration form.
Perhaps more than any other hi-fi product, speakers are sensitive to installation
so please take a little time to read this manual and to follow, as far as practical,
the guidelines it contains. Careful installation will help ensure that your Aegis
Neo speakers perform optimally. Should you have any questions not covered
here we are happy to try and answer them either by telephone or email. Contact
information can be found in Section 13.
This manual covers the Aegis Neo One, Three and Centre. Following the
introduction, it is divided into sections covering handling, installation,
Aegis Neo speakers are relatively delicate precision
engineered products that can be damaged by
inappropriate handling. Please take care when
unpacking or moving them not to touch any of the
drivers. Damage to a driver will at best degrade
performance and at worst result in complete failure.
The enclosure surfaces should also be handled
sympathetically. Any cleaning should only require a
soft cloth, slightly dampened if necessary. Do not use
any polishes or solvent based cleaning agents.
The packaging should be retained for future use.
The Aegis Neo One is intended to be used mounted on speaker floor-stands.
Alternative mounting arrangements such as wall brackets are possible although
these may result in reduced performance. If wall brackets are to be used they
should be as rigid as possible and firmly attached to brick-built walls.
The construction style, rigidity and dimensions of the floor-stands are of critical
significance to the performance of the Aegis Neo One. Stands should broadly
follow the specification below. Your retailer or distributor will be able to offer
advice.
Recommended Neo One Floor-stand Specification.
Construction Style: Direct coupled multi-pillar.
Mass Loading: Preferred.
Overall height: 0.50 - 0.65 m (Aegis Neo One top panel to be just
below head height when seated).
Top plate Dimensions
Minimum width: 140 mm
Maximum width: 180 mm
Minimum depth: 190 mm
Maximum depth: 210 mm
Top plate interface: Direct coupled tri-point or damped-compliance.
Floor interface: Floor spikes (M6 minimum).
Thanks to the use of neodymium magnet systems the Aegis Neo One is intrinsically
magnetically shielded and can be positioned in close proximity to magnetically
sensitive equipment and media.
1. Introduction
3. Neo One Installation
positioning, connection, amplifiers, listening,
specifications, warranty and contact information. We
recommend that you read at least the first six of these
sections carefully before installing and using your
speakers.
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Acoustic energy Aegis Neo at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Acoustic energy Aegis Neo in the language / languages: English as an attachment in your email.

The manual is 0,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info