37080
4
Zoom out
Zoom in
Previous page
1/82
Next page
2
Note: Execute this program to match the country you are currently
in for the modem to function properly.
Installing and Testing the Modem
Installing and Configuring the Software
Install the communications software according to the software user’s
modem of the same COM port and IRQ line used by the modem. You
may be prompted by the software to configure certain communication
parameters. We suggest the following settings:
Testing Your Modem
In order to check if the modem is installed properly, make sure that the
COM Port and IRQ settings of the modem match the software. Type AT
on your terminal screen and press ENTER. The modem should respond
by displaying an OK (or 0). If it does not, either the modem may not
have been installed properly or the software has not been properly
configured.
Using Your Modem
The communications software included with your modem provides a
user friendly interface to access the data and fax. The modem may also
perform basic communication functions (such as dialing) via the AT
commands. Please refer to “AT Commands” on page 4 for detailed
Item Suggested Setting
Baud rate 115200 bps
Data bits 8
Parity none
Stop bit 1
Flow control Xon./Xoff
initialization string AT&F
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Acer System Modem at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Acer System Modem in the language / languages: German as an attachment in your email.

The manual is 0,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info