721684
34
Zoom out
Zoom in
Previous page
1/54
Next page
33
Setting up the Projector Network Environment
This section describes the basic procedure for using the projector via the network. If
the network is already constructed, the projector's network settings may need to be
changed. Please consult your network administrator for assistance with these
settings. You can make network settings both on the projector and on the computer.
The following procedure is for making settings on the computer.
Network settings on the computer
1. Connecting a projector to a computer.
Connect a LAN cable (Category 5, cross-over type) between the computer and
projector.
2. Setting an IP address for the computer.
Adjust the IP settings of the computer to enable one-to-one communications with the
projector.
3. Setting up a network connection for the projector.
Adjust the projector network settings to conform to your network.
Note
When connecting to a hub, use a straight-though Category 5 (CAT.5) type cable
(commercially available).
The following browsers are supported.
- Internet Explorer 11 or later
LAN cable
(commercially available)
Temporarily
change the
computer's IP
address.
Use Internet Explorer
(version 11 or later) to
make various
projector settings.
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Acer RL320 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Acer RL320 in the language / languages: English as an attachment in your email.

The manual is 3,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info