669753
26
Zoom out
Zoom in
Previous page
1/40
Next page
Connecting drone... H:N/A V.S:N/A H.S:N/A D:N/A
12 34 5
Focus POI
Way Point XX
Tilt
Focus POI
Hover Pan360
°„
Take photo Recond
NO YES
Manual
Custom
Custom
Custom
Action
Add Action
0°„
£´
£≠
Custom0°„
£´
£≠
1. When a POI/Point of Interest is set, all waypoints will point to the POI in pan
direction. The custom value will be the angle that the waypoint point to the POI in
pan direction. All single waypoints in pan mode will point to the POI automatically.
2. When no POI is set, all single waypoint in pan mode will be custom value by
default.
3. Custom value in pan direction: The value shows the angle that gimbal points to
the north in pan direction. When the value shows 0°, it means the gimbal pan
direction points to the north. The angle ranges from to 359°. When the angle is
larger, the gimbal pan direction will rotate more in clockwise direction. The custom
value will remain the last setting angle.
2Tilt
Point to the POI (only when the Custom Waypoint gimbal pan mode is selected in
Global Settings): The gimbal will tilt and automatically point the camera lens to the
POI.
Manual: The operation identical to the gimbal tilt control in angle mode. The left
slider on the ST16 controls gimbal tilt angle. The control range operates from to
-90°.
Custom:
At each waypoint, the tilt angle ranges from -90° to 0°. The custom angle
will record the last angle setting.
NOTICE: When single waypoint focuses POI in pan and tilt modes, the camera will
point to the POI automatically. The pilot can also switch to custom mode to trim the
angle to adjust the frame composition.
NOTICE: If a waypoint global setting or POI are not set, the pan and tilt modes of
waypoints both show custom values by default. The default custom value of single
waypoint in pan and tilt modes is 0°.
4. Add action
Multiple actions can be added to any waypoint, including Hover, Pan 360°, or
Record/ Take Photo. Each single point may a maximum of five (5) points.
25
1
2
3
4
5
25 26
1. Lorsqu’un POI/point d’intérêt est déni, tous les points de passage sont orientés vers le POI en
direction Pan. La valeur personnalisée sera l’angle vers lequel est orienté le point de passage dans la
direction Pan. Tous les points de passage unique en mode Pan pointe vers le POI automatiquement.
2. Lorsqu’aucun POI n’est réglé, tous les points de passage en mode Pan deviennent des valeurs per-
sonnalisées par défaut.
3. Valeur personnalisée dans la direction Pan Cette valeur afche l’angle vers lequel est orienté la
nacelle au Nord dans la direction Pan. Lorsque la valeur afche 0°, cela signie que la direction Pan
pointe vers le nord. La plage d’angle va de 0° à 359°. Lorsque l’angle est plus important, la direction de
pan tournera dans le sens horaire. La valeur personnalisée restera le dernier angle de réglage.
2) Inclinaison
Pointez vers le POI (seulement lorsque le mode pan de nacelle Point de passage personnalisé est
sélectionné dans les réglages généraux): La nacelle s’inclinera et pointera la lentille de caméra vers le
POI automatiquement.
Manuel: Lopération est identique à la commande d’inclinaison de la nacelle en mode Angle. Le cur-
seur gauche sur le ST16 commande l’angle d’inclinaison. La plage de commande va de 0° à 90°.
Personnalisation: À chaque point de passage, l’angle d’inclinaison va de -90° to 0°. Langle de per-
sonnalisation enregistrera le dernier angle de réglage.
REMARQUE: Lorsque le point de passage unique met au point le POI en modes Pan et Tilt, la caméra
sera automatiquement pointée vers le POI. Le pilote peut également passer en mode personnalisati-
on pour rogner l’angle an d’ajuster la composition du cadre.
REMARQUE: Si un réglage global de point de passage ou le POI ne sont pas réglés, les modes orien-
tation et inclinaison des points de passage afchent tous les deux les valeurs par défaut. La valeur de
personnalisation par défaut du point de passage en modes Pan et tilt est 0°.
4. Ajouter une action
Plusieurs actions peuvent être ajoutées au point de passage, y compris le vol sur place, l’orientation
à 360° ou l’enregistrement et la prise de photo. Chaque point peut avoir un maximum de cinq (5)
points.
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Acer Predator 17 X GX-791 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Acer Predator 17 X GX-791 in the language / languages: French as an attachment in your email.

The manual is 7,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Acer Predator 17 X GX-791

Acer Predator 17 X GX-791 User Manual - English - 95 pages

Acer Predator 17 X GX-791 User Manual - German - 106 pages

Acer Predator 17 X GX-791 User Manual - Dutch - 99 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info