Manual Acer Predator 17 X GX-791 (page 17 of 40) (French)

669753

Zoom out

Zoom in

1/40

When the flight altitude of the aircraft is lower

han the desired altitude, it will climb to the desired

altitude

vertically first, then fly back at the current

altitude

and descends vertically within 13-26ft(4-8m)

of the pilot until it automatically lands.

When the flight altitude of the aircraft is higher

han the desired altitude, it will fly back at the

curr

ent altitude, then descend vertically within

13-26ft

(4-8m) of the pilot until it lands

automaticall

Befo

re switching to Home Mode, press the Setting

Calibration

button on the right task column. Select

Home

Altitude and set a altitude as the desired

altitude, and then Home Mode can be activated. The

flight path is as follows:

If H920 PLUS loses the link with the ST16 Ground Station, it will automatically enter

Home Mode.

NOTICE:

If the Ground Station signal is lost, H920 PLUS will automatically return to

home point and hold its position (with a suitable GPS signal/lock) over the home

position (except in instances of low battery, where it will land itself).

PILOT LOCATION

LANDING

LOCATION

8m�(HOME)�

Horizontal�Distance�from�Pilot

Pilot

ADDITIONA

L FUNCTIONS:

If the PAN mode of the gimbal camera is switched to Follow and Follow Pan Controllable

modes, the gimbal TILT angle will be adjusted as the same as the angle what the gimbal

camera is at each waypoint after the pilot set the waypoints automatically and continuously.

When the PAN mode is switched to the Global Mode, the PAN and TILT angle can be

controlled by aileron and elevator stick.

OTICE: The direct distance between every two waypoints should be more than 16 ft./5 meters.

as k MODES

p the TASK/CAMERA icon, the background of 'TASK' will become orange, then the menu

opens

another interface displaying functions: WAYPOINT, CCC (Curve Cable Cam),

Journe

y, POI (Point of Interest), ORBIT ME and TAKE OFF.

Et si le H920 PLUS perd la liaison avec le poste au sol ST16, il passera automatiquement en mode Home.

REMARQUE : Si le signal de la télécommande est perdu, le H920 PLUS reviendra automatiquement

au point de départ et conservera sa position (grâce à un signal/verrouillage GPS adapté) vers la positi-

on de départ (sauf en cas de batterie faible, où elle atterrit.

Avant de passer au mode Home, appuyez sur le bouton Set-

ting Calibration (calibrage) sur la colonne des tâches droites.

Sélectionnez Home Altitude et dénir une hauteur comme

altitude désirée et le mode Home peut alors être activé. La

trajectoire de vol se présente comme suit :

1. Lorsque la hauteur de vol de l’aéronef est inférieure

à l’altitude désirée, il monte à l’altitude désirée dans un

premier temps, puis revient à la hauteur actuelle et descend

verticalement à 13-26 pieds (4-8m) du pilote avant d’atterrir

automatiquement.

2. Lorsque la hauteur de vol de l’aéronef est supérieure à l’al-

titude désirée, il revient à l’altitude désirée dans un premier

temps, puis descend verticalement à 13-26 pds (4-8m) du

pilote avant d’atterrir automatiquement.

EMPLACEMENT

D’ATTERRISSAGE

LOCALISATION

DU PILOTE

DISTANCE HORIZONTALE À PARTIR DU PILOTE

FONCTIONS SUPPLÉMENTAIRES :

MODES TÂCHES

Tapez sur l’icône TÂCHE/CAMÉRA, l’arrière-plan de «TÂCHE» deviendra orange, puis le menu ouvre

une autre interface afchant les fonctions suivantes: WAYPOINT, fonctions CCC (Caméra à trajectoi-

re courbée), Voyage, POI (Point d’intérêt), ORBIT ME et TAKE OFF.

CCC: (Curve Cable Cam) Caméra à trajectoire courbée permet la création d’un

itiniéraire/d’une mission pour le H920 PLUS. Une fois que le pilote à dénit les points, le

H920 PLUS volera selon les coordonnées réglées tout en se rappelant de la direction.

Si le mode PAN de la caméra à nacelle est réglé sur les modes Suivi et Suivi d’inclinaison contrôlable,

l’angle d’INCLINAISON de la nacelle sera réglé sur le même angle que celui de la caméra à nacelle à

chaque point de repère après que le pilote ait réglé les points de repère automatiquement et en cont-

inu. Lorsqu’on bascule du mode PAN vers le mode Global, l’angle d’ORIENTATION et d’INCLINAISON

peut être contrôlé par l’aileron et le levier d’élévation.

REMARQUE: La distance directe entre deux points de passage ne doit pas excéder 16 pieds/5 mètres.

PILOTE

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Acer Predator 17 X GX-791 in the language / languages: French as an attachment in your email.

The manual is 7,7 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Acer Predator 17 X GX-791

Acer Predator 17 X GX-791 User Manual - English - 95 pages

Acer Predator 17 X GX-791 User Manual - German - 106 pages

Acer Predator 17 X GX-791 User Manual - Dutch - 99 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Acer Predator 17 X GX-791 Manual

Product: