5669
11
Zoom out
Zoom in
Previous page
1/31
Next page
11
...Nederlands
De projector uitschakelen
1. Druk op de knop “Voeding/Stand-by” om de projectorlamp uit
te schakelen. Het bericht “Power off the lamp?” (Lamp
uitschakelen?) wordt op het OSD-scherm weergegeven.
2. Druk opnieuw op de knop “Voeding/Stand-by” om uw keuze te
bevestigen.
Doet u dat niet, dan verdwijnt het bericht na 5 seconden.
3. De koelventilators blijven nog gedurende ongeveer 60
seconden werken voor de afkoelingscyclus en de knop
“Voeding/stand-by” wordt oranje. Wanneer het groene licht
begint te knipperen, betekent dit dat de projector is
overgeschakeld naar de stand-bymodus.
Als u de projector opnieuw wilt inschakelen, moet u wachten
tot de projector het afkoelingsproces voltooid heeft en naar de
stand-bymodus is gegaan. Wanneer hij in stand-by staat kunt
u weer op de knop “Voeding/stand-by” drukken om de projec-
tor opnieuw te starten.
4. Koppel de voedingskabel los van het stopcontact en van de
projector.
5. Schakel de projector niet opnieuw in nadat u hem hebt
uitgeschakeld.
Waarschuwingsindicator
Wanneer de indicator “LAMP” gedurende ongeveer 2 minuten
oranje blijft zal de projector zichzelf automatisch
uitschakelen. Neem contact op met uw lokale verdeler of
onderhoudsdienst.
Wanneer de indicator “TEMP” oranje oplicht, duidt dit op een
oververhitting van de projector. Het bericht “Projector Overheated.
” (Oververhitting) wordt weergegeven op het scherm. De projector
zal zichzelf automatisch uitschakelen.
In normale omstandigheden kan de projector opnieuw worden
ingeschakeld voor uw presentatie. Indien het probleem zich
blijft voordoen, neem dan contact op met uw lokale verdeler of
onze onderhoudsdienst.
Wanneer de indicator “TEMP” oranje oplicht en knippert
gedurende ongeveer 10 seconden, wordt het bericht “Fan fail. Lamp
will automatically turn off soon. ” (defect ventilator) weergegeven
op het scherm. Gelieve contact op te nemen met uw lokale verdeler of
onze onderhoudsdienst.
Installatie
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Acer PD112 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Acer PD112 in the language / languages: Dutch as an attachment in your email.

The manual is 2,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info