721031
54
Zoom out
Zoom in
Previous page
1/64
Next page
Acer Projector
H6820M/V6820M/E8620/E8620C/ET-4K17/
HT-4K17/GM836/HV836/VH-737/TH-737/
H6820i/V6820i/D4K1736/D4K1731
User's Guide
Copyright © 2018. Acer Incorporated.
All Rights Reserved.
Acer Projector User's Guide
Original Issue: 03/2018
Changes may be made periodically to the information in this publication without obligation
to notify any person of such revisions or changes. Such changes will be incorporated in new
editions of this manual or supplementary documents and publications. This company makes
no representations or warranties, either expressed or implied, with respect to the contents
hereof and specifically disclaims the implied warranties of merchantability or fitness for a
particular purpose.
Record the model number, serial number, purchase date and place of purchase information in
the space provided below. The serial number and model number are recorded on the label
affixed to your projector. All correspondence concerning your unit should include the serial
number, model number and purchase information.
No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in
any form or by any means, electronically, mechanically, by photocopy, recording or otherwise,
without the prior written permission of Acer Incorporated.
Model number: _________________________________
Serial number: __________________________________
Date of purchase: _______________________________
Place of purchase: ______________________________
Acer and the Acer logo are registered trademarks of Acer Incorporated. Other companies' product
names or trademarks are used herein for identification purposes only and belong to their respective
companies.
"HDMI™, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered
trademarks of HDMI Licensing LLC."
iii
Information for your safety and
comfort
Read these instructions carefully. Keep this document for future reference.
Follow all warnings and instructions marked on the product.
Turning the product off before cleaning
Unplug this product from the wall outlet before cleaning. Do not use liquid
cleaners or aerosol cleaners. Use a damp cloth for cleaning.
Caution for plug as disconnecting device
Observe the following guidelines when connecting and disconnecting power to
the external power supply unit:
Install the power supply unit before connecting the power cord to the AC
power outlet.
Unplug the power cord before removing the power supply unit from the
projector.
If the system has multiple sources of power, disconnect power from the
system by unplugging all power cords from the power supplies.
Caution for Accessibility
Be sure that the power outlet you plug the power cord into is easily accessible
and located as close to the equipment operator as possible. When you need to
disconnect power to the equipment, be sure to unplug the power cord from the
electrical outlet.
Warnings!
Do not use this product near water.
Do not place this product on an unstable cart, stand or table. If the product
falls, it could be seriously damaged.
Slots and openings are provided for ventilation to ensure reliable
operation of the product and to protect it from overheating. These
openings must not be blocked or covered. The openings should never be
blocked by placing the product on a bed, sofa, rug or other similar surface.
This product should never be placed near or over a radiator or heat
register, or in a built-in installation unless proper ventilation is provided.
Never push objects of any kind into this product through cabinet slots as
they may touch dangerous voltage points or short-out parts that could
result in a fire or electric shock. Never spill liquid of any kind onto or into
the product.
To avoid damage of internal components and to prevent battery leakage,
do not place the product on a vibrating surface.
iv
Never use it under sporting, exercising, or any vibrating environment
which will probably cause unexpected short current or damage rotor
devices, lamp.
Using electrical power
This product should be operated from the type of power indicated on the
marking label. If you are not sure of the type of power available, consult
your dealer or local power company.
Do not allow anything to rest on the power cord. Do not locate this
product where people will walk on the cord.
If an extension cord is used with this product, make sure that the total
ampere rating of the equipment plugged into the extension cord does not
exceed the extension cord ampere rating. Also, make sure that the total
rating of all products plugged into the wall outlet does not exceed the fuse
rating.
Do not overload a power outlet, strip or receptacle by plugging in too
many devices. The overall system load must not exceed 80% of the branch
circuit rating. If power strips are used, the load should not exceed 80% of
the power strip's input rating.
This product's AC adapter is equipped with a three-wire grounded plug.
The plug only fits in a grounded power outlet. Make sure the power outlet
is properly grounded before inserting the AC adapter plug. Do not insert
the plug into a non-grounded power outlet. Contact your electrician for
details.
Warning! The grounding pin is a safety feature. Using a power outlet that is
not properly grounded may result in electric shock and/or injury.
Note: The grounding pin also provides good protection from unexpected
noise produced by other nearby electrical devices that may interfere with
the performance of this product.
Use the product only with the supplied power supply cord set. If you need
to replace the power cord set, make sure that the new power cord meets
the following requirements: detachable type, UL listed/CSA certified, VDE
approved or its equivalent, 4.5 meters (15 feet) maximum length.
Product servicing
Do not attempt to service this product yourself, as opening or removing covers
may expose you to dangerous voltage points or other risks. Refer all servicing to
qualified service personnel.
Unplug this product from the wall outlet and refer servicing to qualified service
personnel when:
v
the power cord or plug is damaged, cut or frayed
liquid was spilled into the product
the product was exposed to rain or water
the product has been dropped or the case has been damaged
the product exhibits a distinct change in performance, indicating a need
for service
the product does not operate normally after following the operating
instructions
Note: Adjust only those controls that are covered by the operating
instructions, since improper adjustment of other controls may result in
damage and will often require extensive work by a qualified technician to
restore the product to normal condition.
Warning! For safety reasons, do not use non-compliant parts when adding
or changing components. Consult your reseller for purchase options.
Your device and its enhancements may contain small parts. Keep them out of
the reach of small children.
Additional safety information
Do not look into the projector's lens when the lamp is on. The bright may
hurt your eyes.
Turn on the projector first and then signal sources
Do not place the product in following environments:
Space that is poorly ventilated or confined. At least 50cm clearance from walls
and free flow of air around the projector is necessary.
Locations where temperatures may become excessively high, such as inside of a
car with all windows rolled up.
Locations where excessive humidity, dust, or cigarette smoke may contaminate
optical components, shortening the life span and darkening the image.
Locations near fire alarms.
Locations with an ambient temperature above 40 ºC/104 ºF.
Locations where the altitudes are higher than 10000 feet.
Unplug immediately if there is something wrong with your projector. Do
not operate if smoke, strange noise or odor comes out of your projector. It
might cause fire or electric shock. In this case, unplug immediately and
contact your dealer.
Do not keep using this product to break or drop it. In this case contact your
dealer for inspection.
Do not face the projector lens to the sun. It can lead to fire.
When switching the projector off, suggest to ensure the projector
completes its cooling cycle before disconnecting power.
Do not frequently turn off the main power abruptly or unplug the
projector during operation. The best way is to wait for the fan to turn off
vi
before turning main power off.
Do not touch air outlet grille and bottom plate which becomes hot.
Do not look into the air outlet grille when projector is operating. It may
hurt your eyes.
Always open the lens shutter or remove the lens cap when the projector is
on.
Do not block the projector lens with any object when the projector is
under operation as this could cause the object to become heated and
deformed or even cause a fire.
The lamp becomes extremely hot during operation. Allow the projector to
cool for approximately 45 minutes prior to removing the lamp assembly for
replacement.
Do not operate lamps beyond the rated lamp life. It could cause it to break
on rare occasions.
Never replace the lamp assembly or any electronic components unless the
projector is unplugged.
The product will detect the life of the lamp itself. Please be sure to change
the lamp when is showing warning message.
When changing the lamp, please allow unit to cool down, and follow all
changing instructions.
Reset the "Lamp Hour Reset" function from the Onscreen display
"Settings" menu after replacing the lamp module.
Do not attempt to disassemble this projector. There are dangerous high
voltages inside which may hurt you. The only user serviceable part is the
lamp which has its own removable cover. Refer servicing only to suitable
qualified professional service personnel.
Do not stand the projector on end vertically. It may cause the projector to
fall over, causing injury or damage.
This product is capable of displaying inverted images for ceiling mount
installation. Only use acer ceiling mount kit for mounting the projector
and ensure it is securely installed.
The projector should be placed in a horizontal way by means of desktop or
ceiling mount mode only, and its tilt angles should not exceed 6 degrees,
otherwise it would cause dramatical decrease of lamp life or severe safety
concern of system malfunction.
vii
Caution for Listening
To protect your hearing, follow these instructions.
Increase the volume gradually until you can hear clearly and comfortably.
Do not increase the volume level after your ears have adjusted.
Do not listen to music at high volumes for extended periods.
Do not increase the volume to block out noisy surroundings.
Decrease the volume if you can't hear people speaking near you.
Disposal instructions
Do not throw this electronic device into the trash when discarding. To minimize
pollution and ensure utmost protection of the global environment, please
recycle. For more information on the Waste from Electrical and Electronics
Equipment (WEEE) regulations, visit
http://www.acer-group.com/public/Sustainability/sustainability01.htm
Mercury advisory
For projectors or electronic products containing an LCD/CRT monitor or display:
Lamp(s) inside this product contain mercury and must be recycled or disposed of
according to local, state or federal laws. For more information, contact the
Electronic Industries Alliance at www.eiae.org. For lamp-specific disposal
information, check www.lamprecycle.org
Do not stare into the beam, RG2
"As with any bright source, do not stare into the direct beam, RG2 IEC 62471-
5:2015"
“Lamp(s) contain Mercury,
Dispose Properly.”
RG2
viii
First things first
Usage Notes
Do:
Turn off the product before cleaning.
Use a soft cloth moistened with mild detergent to clean the display
housing.
Disconnect the power plug from AC outlet if the product is not being used
for a long period of time.
Don't:
Block the slots and openings on the unit provided for ventilation.
Use abrasive cleaners, waxes or solvents to clean the unit.
Use under the following conditions:
In extremely hot, cold or humid environments.
In areas susceptible to excessive dust and dirt.
Near any appliance that generates a strong magnetic field.
Place In direct sunlight.
Precautions
Follow all warnings, precautions and maintenance as recommended in this
user's guide to maximize the life of your unit.
Warning:
Do not look into the projector's lens when the lamp is on. The bright light may hurt
your eyes.
To reduce the risk of fire or electric shock, do not expose this product to rain or
moisture.
Please do not open or disassemble the product as this may cause electric shock.
When changing the lamp, please allow unit to cool down, and follow all changing
instructions.
This product will detect the life of the lamp itself. Please be sure to change the lamp
when it shows warning messages.
Reset the "Lamp Hour Reset" function from the Onscreen display "Settings" menu
after replacing the lamp module.
When switching the projector off, please ensure the projector completes its cooling
cycle before disconnecting power.
Turn on the projector first and then the signal sources.
Do not use lens cap when projector is in operation.
When the lamp reaches the end of its life, it will burn out and may make a loud
popping sound. If this happens, the projector will not turn back on until the lamp
module has been replaced. To replace the lamp, follow the procedures listed under
"Replacing the Lamp".
Information for your safety and comfort iii
First things first viii
Usage Notes viii
Precautions viii
Introduction 1
Product Features 1
Package Overview 2
Projector Overview 4
Projector Outlook 4
Control Panel 6
Remote Control Layout 7
Getting Started 9
Connecting the Projector 9
Turning the Projector On/Off 11
Turning on the Projector 11
Turning the projector off 12
Adjusting the Projected Image 13
Adjusting the Height of Projected Image 13
How to optimize image size and distance 14
How to get a preferred image size by adjusting
distance and zoom 15
How to get a preferred image position by
adjusting lens shift 16
User Controls 18
Onscreen Display (OSD) Menus 18
Startup menu (for First time) 19
Projector menu 19
Application menu 20
Settings menu 20
Projector System OSD 23
Color 23
3D 26
Audio 27
Setting 27
Contents
Information 29
Reset All 29
Acer LAN management 30
Configuring the network settings 30
Configuring the Projector Control 32
Configuring the Wireless 33
Appendices 34
Troubleshooting 34
LED & Alarm Definition Listing 38
Replacing the Lamp 39
Ceiling Mount Installation 40
Specifications 43
Compatibility modes 45
Regulations and safety notices 50
1
English
Introduction
Product Features
This product is a single-chip DLP
®
projector. Outstanding features include:
DLP
®
technology
Auto/4:3/16:9/Native aspect ratio supported
High brightness and contrast ratio
Versatile display modes enable optimum performance in any situation
HDTV (480i/p, 576i/p, 720p, 1080i/p, 2160p) supported
Lower power consumption and economy (ECO) mode extend lamp life
Acer EcoProjeciton Technology delivers Intelligent power management
approach and physical efficiency improvement
Smart detection delivers quick, intelligent source detection
Multi-language onscreen display (OSD) menus
Manual focus/zoom projection lens
0.8x~2.0x digital zoom
Microsoft
®
Windows
®
2000, XP, Vista
®
, Windows 7, Windows 8.1,
Windows 10, Macintosh
®
OS compliant, ChromeOS Compliant
Auto image re-sizing to 4K Addressable Pixels full screen
Manual lens vertical shift adjustment
Note: Functions vary depending on model definition.
2
English
Package Overview
This projector comes with all the items shown below. Check to make sure your
unit is complete. Contact your dealer immediately if any thing is missing.
Projector Power cord HDMI cable
User’s guide (option) Quick start guide Carrying case
(option)
Remote control AAA battery x2
(option)
WirelessCAST
(option)
WirelessHD-Kit
(option)
WirelessProjection-Kit User's guide
(for multi-media and
wireless functions)
Quick start guide
(for multi-media and
wireless functions)
DC 5
V
IN
MHL HDMI
3
English
Note: When projecting a 4K2K/60Hz signal, use an HDMI Premium
certified 4K2K/60Hz cable supporting 18Gbps bandwidth.
Trust the cable with the label
9
English
Getting Started
Connecting the Projector
11
13
R
L
HDTV adapter
RCA
4
6
2
10
10
3
3
3
9
5
5
8
7
12
2
2
1
15
14
10
16
USB flash
drive
Video Output
Display
Screen
Speakers
Audio Output
3D IR emitter
Smart devices
10
English
Note 1: To ensure the projector works well with your computer,
please make sure the timing of the display mode is compatible
with the projector.
Note 2: Functions vary depending on model definition.
Note 3:
USB cable needs powered extender if the length is over 5 m.
Note 4: USB DC 5V out connector support 5V power output for
HDMI dongle charging.
Note 5: DC 12V out connector support 12V/100mA power for
screen control only.
# Description # Description
1 Power cord 9 WirelessHD dongle
2 Audio cable 10 Wireless dongle
3 HDMI (MHL) cable 11 Wireless remote control
4 VGA to component/HDTV adapter 12 LAN cable
5 VGA cable 13 12V DC cable
6 3 RCA component cable 14 3D SYNC cable
7 Composite video cable 15 SPDIF cable
8 RS232 cable 16 USB flash drive
11
English
Turning the Projector On/Off
Turning on the Projector
1 Ensure that the power cord and signal cable are securely connected. The
Power indicator LED will flash red.
2 Turn on the projector by pressing "Power" button on the control panel or
remote control, and the Power indicator LED will turn blue.
3 Turn on your source (computer, notebook, video player ,etc.). The
projector will detect your source automatically.
If the screen displays "Lock" and "Source" icons, it means the
projector is locked onto a specific source type and there is no such
type of input signal detected.
If the screen displays "No Signal", please make sure the signal cables
are securely connected or press source direct key.
If you connect to multiple sources at the same time, use the "Source"
button on either control panel or the remote control or direct source
key on the remote control to switch between inputs.
12
English
Turning the projector off
1 To turn the projector off, press and hold the power button. This message
appears: "Please press the power button again to complete the shutdown
process." Press the power button again.
2 The LED power indicator will turn RED and blink rapidly after the projector
is turned off, and the fan(s) will continue to operate for about 10 seconds
to ensure that the system cools properly.
3 Once the system has finished cooling, the LED power indicator will stop
blinking and turn solid red to indicate standby mode.
4 It is now safe to unplug the power cord.
Warning indicators:
"Projector Overheated. Lamp will automatically turn off soon."
This onscreen message indicates that the projector has overheated.
The lamp with automatically turn off, the projector will automatically
shut down, and the LED temp indicator will turn solid red. Contact
your local dealer or service center.
"Fan failed. Lamp will automatically turn off soon."
This onscreen message indicates that the fan has failed. The lamp will
automatically turn off, the projector will automatically shut down,
and the LED temp indicator will blink. Contact your local dealer or
service center.
Note 1: Whenever the projector automatically shuts down and the
LED lamp indicator turns solid red, contact your local reseller or
service center.
Note 2: Functions vary depending on model definition.
Attention! The projector will enter a two minute cool down
period to ensure continued optimal lamp operation.
Attention! Please do not turn off projector within 1 minute after
power on.
16
English
How to get a preferred image position by adjusting
lens shift
The projector is equipped with lens shift for adjusting the position of projected
image up and down without requiring you to physically move the projector.
Note: The figures shown in this section are for reference only not
approximate value. The figures between units can be different
due to assembly tolerance.
1
2
Vertical Lens
Shift ring
20
English
Application menu
Note 1: Functions vary depending on model definition.
Note 2: For more detailing instructions, please refer to the Media User's
Guide.
Settings menu
Volume
Press to decrease the volume.
Press to increase the volume.
Media Player
This mode allows you to browse data files stored in USB flash drive
after connecting to projector.
WiFi Display
Please refer to EZCast Screen application.
Smart Home
Scan QR code linking for more information about Smart Home.
Language
Choose the multilingual OSD menu.
Projector
Application
Settings
Media Player
More information for
Projector and Smart Home
WiFi Display
Smart Home
Projector
Application
Settings
Language
Network
More information for
Projector and Smart Home
21
English
Network
Projector Control Settings: Use the Network to control the
projector.
To configure the wireless connection, select Wireless setting and do
the following:
a. Insert a WiFi dongle first, and then enable the Wi-Fi function.
b. Connect to an available Wi-Fi network from the list.
If you connect to a secure Wi-Fi network, you must enter the
password when prompted.
Ethernet Settings: configure the network parameters.
Network Status: for network status.
MAC Address: Identify MAC address.
DHCP: Choose "On" the projector will obtain an IP
address automatically from your network. Choose "Off"
to assign an IP address manually.
IP Address: Identify IP address.
Subnet Mask: Identify Mask address.
DNS: Identify DNS address.
Wireless Setting
Projector Control Functions: select "Projector Control
Functions" to configure how to monitor and control your
projector over the network. For more information refer to
Media User’s Manual.
Wireless Setting (Wi-Fi Display)
Select "Wireless Setting" to connect to other Smart Home devices
after you have complete the necessary connection settings. For
more information refer to Media User’s Manual.
Network Reset
Select "Yes" to reset the network.
22
English
Using the Projector System OSD menus
To open the Projector System OSD menu, press "MENU" on the remote
control or control panel.
When the Projector System OSD is displayed, use the keys to select
any item in the main menu. After selecting the desired main menu item,
press "ENTER" to enter submenu for feature setting.
Use the keys to select the desired item and adjust the settings by
using the keys.
Select the next item to be adjusted in the submenu and adjust as described
above.
Press "BACK" on the remote control or control panel, the screen will return
to the main menu.
To exit Projector System OSD, press "BACK" on the remote control or
control panel. The Projector System OSD menu will close and the projector
will automatically save the new settings.
Note 1: Some of the following OSD settings may not be available. Please
refer to the actual OSD of your projector.
Note 2: Functions vary depending on model definition.
3D
Press ENTER
Projector
Settings
More information for
Projector and Alexa
3
D
P
ress
ENTER
M
o
r
e
inf
o
rm
a
ti
o
n
P
ro
j
ector an
d
Al
e
x
SettingsApplication
Color
Press ENTER
Volume
Audio
Press ENTER
Setting
Press ENTER
Information
Press ENTER
Reset All
Press ENTER
Main menu
Sub menu
23
English
Projector System OSD
Color
Display Mode
There are many factory presets optimized for various types of
images.
Movie: For brighter and general movie/video/photo playing.
HDR: Decodes and displays High Dynamic Range (HDR)
content for the deepest blacks, brightest whites, and vivid
cinematic color using REC.2020 color gamut. This mode will
be automatically enabled if HDR is set to ON (and HDR
Content is sent to projector – 4K UHD Blu-ray, 1080p/4K UHD,
HDR Games, 4K UHD Streaming Video).
Standard: For common environment.
Silent: For silent environment.
Rec. 709: standard Rec. 709 color space.
Bright: For brightness optimization.
User: Memorize user's settings.
3D: To experience the 3D effect, you need to have 3D glasses.
Make sure a Blu-ray 3D DVD player is installed.
ISF Day: Calibrate and optimize the projection image based
on bright environment by an ISF Certified technician.
ISF Night: Calibrate and optimize the projection image based
on dark environment by an ISF Certified technician.
<Note>
While HDR mode is active, other display modes cannot be selected.
HDR
HDR
Compatible with the latest HDR format, which delivers crisp, clear
images with sharp changes in brightness, and provides realistic
images with enhanced details, extended depth of field, and rich
color gamut. HDR of any variety works best when viewing at night
or in a dark room.
On: Turn on HDR Processing.
Off: Turn off HDR Processing.
HDR Mode
There are 4 levels and each level suits different type of content,
including dark and bright scene.
Brightness
Adjust the brightness of the image.
Press to darken the image.
Press to lighten the image.
Contrast
"Contrast" controls the difference between the lightest and
darkest parts of the picture. Adjusting the contrast changes the
amount of black and white in the image.
Press to decrease the contrast.
Press to increase the contrast.
24
English
Sharpness
Adjusts the sharpness of the image.
Press to decrease the sharpness.
Press to increase the sharpness.
Saturation
Adjusts a video image from black and white to fully saturated
color.
Press to decrease the amount of color in the image.
Press to increase the amount of color in the image.
Tint
Adjusts the color balance of red and green.
Press to increase the amount of green in the image.
Press to increase the amount of red in the image.
Gamma
Effects the representation of dark scenery. With greater gamma
value, dark scenery looks brighter.
Advanced
White Peaking
Increases the brightness of whites that are near 100%. (video
sources only)
Color Temperature
Use this function to choose CT1, CT2, CT3.
Color Gamut
Select an appropriate color gamut from Standard, Movie, HDR, Rec.
709 or Bright.
Color Space
Select an appropriate color matrix type from the following: Auto,
RGB, or YUV.
HSG
Ind. Color Management
Adjusts the red, green, blue, cyan, yellow and magenta colors.
Ind. Hue: Adjusts the color balance of red and green.
Ind. Saturation: Adjusts the selected color to be less or more
saturated color.
Ind. Gain: Adjusts the selected color's brightness.
Ind. R Gain: Adjusts the selected red gain.
Ind. G Gain: Adjusts the selected green gain.
Ind. B Gain: Adjusts the selected blue gain.
RGB Gain/Bias
Adjusts the red gain/green gain/blue gain/red bias/green bias/blue
bias for color optimization.
27
English
Note 3: "3D L/R Invert" is only available when 3D is enabled.
Note 4: There has reminder screen if 3D still enable when power on projector.
Please adjust setting depended on your purpose.
Note 5: Functions vary depending on model definition.
Audio
Note: Functions vary depending on model definition.
Settings
Speaker
Choose "On" to play sound through the projector's
speaker. (internal)
Choose "Off" to disable projector's speaker. (internal)
Audio Out
Choose "On" to play sound through from your audio
amplifier. (external)
Choose "Off" to disable the headphone or audio amplifier.
(external)
Mute
Choose "On" to mute the volume.
Choose "Off" to restore the volume.
Volume
Press to decrease the volume.
Press to increase the volume.
Lamp Lamp Hour Elapse
Displays the lamp’s elapsed operating time (in hours).
Lamp Hour Reset
Choose "Yes" and press "ENTER"to turn the lamp hour counter to 0
hours.
Lamp Reminding
Activate this function to display a reminder to change the lamp 30
hours before its expected end-of-life.
Filter Filter Hour
Show the filter used hour information. When meeting max time
based on selected place, it will pop up a warning message to ask for
replacing filter.
Filter Reminding (Hours)
Default of Replacement Reminder is "Off". Choose other settings to
activate filter replacement reminder after installing 3D dust filter.
Filter Reset
Choose "Yes" to return the parameter to the factory default after
replacing new 3D dust filter.
29
English
Information
Note: Functions vary depending on model definition.
Reset All
Note: Functions vary depending on model definition.
Display the projector information for Model Name, Serial No.,
Input Source, Signal Type, Display Mode, Color Depth, Color
Format, Software Version on the screen.
Choose "Yes" to return the parameters on all menus to the factory
default settings.
30
English
Acer LAN management
Configuring the network settings
1 Press on the remote control. The home screen appears.
2 Select Settings > Network.
3 Perform the necessary settings. You can find three main functions:
Projector Control Settings, Wireless Setting and Network Reset.
Projector
Application
Settings
Source
Projector
Settings
Volume
More information for
Projector and Smart Home
Projector
Application
Settings
Language
Network
More information for
Projector and Smart Home
Settings
Network Setting
Projector Control Settings
Wireless Settings (Wi-Fi Display / Sy..
Network Reset
Disabled
31
English
Note: To configure the wireless connection, select Wireless setting
and do the following:
a. Insert a WiFi dongle first, and then enable the Wi-Fi function.
b. Connect to an available Wi-Fi network from the list. If you
connect to a secure Wi-Fi network, you must enter the password
when prompted.
Settings
Network Settings > Projector Control Settings
Ethernet Settings
Wireless Settings
Projector Control Functions
Disabled
Settings
Network Settings > Projector Control Settings > Wireless Settings
WiFi
Add network manually
32
English
Configuring the Projector Control
Projector Control Settings Ethernet Settings: Enter the Server IP address by
192.168.100.10 to find below homepage of acer LAN webpage management
and configure the network parameters.
Wireless Settings: Select Register to register your network SSID and password,
and specify the security type.
Settings
Network Setting > Projector Control Settings
Ethernet Settings
Wireless Settings
Projector Control Functions
Settings
Network Setting > Projector Control Settings > Ethernet Settings
Network Status
MAC Address
DHCP
IP Address
Subnet Mask
Gateway
DNS
Connected
AA-BB-CC-DD-EE-FF
Disabled
Settings
Network Settings
Password
Add network
CONNECT
Show password
37
English
OSD Messages
Problems with the Projector
# Condition Message Reminder
1 Message
Fan Fail - the system fan is not working.
Projector Overheated - the projector has exceeded its
recommended operating temperature and must be allowed
to cool down before it may be used. Please check the
following message.
Replace the lamp - the lamp is about to reach its maximum
lifetime. Prepare to replace it soon.
# Condition Solution
1 The projector stops responding
to all controls
If possible, turn off the projector, then
unplug the power cord and wait at least 30
seconds before reconnecting power.
2 Lamp burns out or makes a
popping sound
When the lamp reaches the end of its useful
life, it will burn out and may make a loud
popping sound. If this happens, the projector
will not turn on until the lamp module has
been replaced. To replace the lamp, follow
the procedures in the "Replacing the Lamp"
section.
Fan Fail.
Lamp will automatically turn off soon.
Projector overheated, system will turn off automatically soon, please:
1. Check if operation ambient temperature between 5 degree and 40 degree..
2. Check if filter needs to be cleaned.
3. Check if inlet or outlet is blocked.
4. Check if high altitude mode is set when the projector operating at high altitude area.
Lamp is approaching the end of its useful life in full power operation.
Replacement suggested!
40
English
Ceiling Mount Installation
If you wish to install the projector using a ceiling mount, please refer to the
steps below:
1 Drill four holes into a solid, structural ceiling member, and secure the
ceiling mount base to the ceiling.
2 Choose the length combination based on actual environment. (CM-01S
doesn’t include Type 2 and Type 3.)
Type 1 Type 2 Type 3
43
English
Specifications
The specifications listed below are subject to change without notice. For final
specs, please refer to Acer's published marketing specifications.
Projection system
DLP
®
4K UHD
Resolution Native 3840x2160 resolution
Maximum: UXGA (1600 x 1200), WSXGA+
(1680x1050), 1080p(1920x1080), WUXGA-RB (1920
x 1200), UHD(3840x2160), 4K(4120x2160)
Computer compatibility IBM PC and compatibles, Apple Macintosh, iMac and
VESA standards: SXGA, XGA, VGA, SVGA, SXGA+,
WXGA, WXGA+, WSXGA +
Video compatibility HDTV (720p, 1080i, 1080p), EDTV (480p, 576p), SDTV
(480i, 576i), 2160p
Aspect ratio Auto, 4:3, 16:9, Native
Displayable colors 1.07 billion colors
Optical zoom ratio 1.3X
Throw ratio 1.21 ~ 1.59:1 (75"@2.0m)
Projection lens F = 1.94 ~ 2.23,
f = 12.81mm ~ 16.74mm,
Manual Zoom & Focus
Projection screen size (diagonal) 37" (94cm)~ 300" (762cm)
Projection distance 1.0m ~ 8.0m (3.3' ~ 26.4')
Horizontal scan rate 15 - 135 kHz
Vertical refresh scan rate 24 - 120 Hz
Lamp type 240 W user-replaceable lamp
Audio Internal speaker with 5W x 2 output
Weight 5.5 Kg (12.1 lbs)
Dimensions (W x D x H) (with feet) 398 mm X 297.5 mm X 127 mm (15.7" x 11.7" x 5.0")
Digital zoom 0.8x ~ 2.0x
Power supply AC input 100 - 240 V auto-switching power supply
Power consumption Normal mode: 310W ± 10% @ 110VAC
ECO mode: 230W ± 10% @ 110VAC
Standby mode < 0.5W
Operating temperature 0ºC to 40ºC / 32ºF to 104ºF
Standard package contents
AC power cord x1
HDMI cable x1
Remote control x1
AAA battery x2 (for remote control) (option)
User's guide (Projector) (CD-ROM) x1
User's guide (Media/Wireless function) (CD-ROM) x1
Quick start guide (Projector) x1
Quick start guide (Media/Wireless function) x1
Carrying case x1 (option)
44
English
Note: Design and specifications are subject to change without
notice.
I/O connectors H6820M/V6820M/E8620/E8620C/ET-4K17/
HT-4K17/GM836/HV836/VH-737/TH-737/
H6820i/V6820i/D4K1736/D4K1731
Power socket V
VGA IN V
HDMI1 V
HDMI2 V
RJ45 LAN input V
RS232 V
3.5 mm audio jack input V
3.5 mm audio jack output V
5V DC output V
12V DC output V
Service connector V
USB connector (for wireless control) V
USB connector (for wireless display) V
S/PDIF output V
54


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Acer GM836 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Acer GM836 in the language / languages: English as an attachment in your email.

The manual is 7,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Acer GM836

Acer GM836 User Manual - German - 64 pages

Acer GM836 User Manual - Dutch - 64 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info