721681
30
Zoom out
Zoom in
Previous page
1/54
Next page
29
• On: Approx. 80%
Note
When “Eco Mode” is set to “On”, the fan sound and power consumption are lower than
they are when “Off” is selected. (Projection brightness decreases.)
Light Source Hours
You can confirm the cumulative usage time.
Auto Power Off
Disable: The Auto Power Off function will be disabled.
10 Min./20 Min./30 Min.: When no input signal is detected for more than selected
time, the projector will automatically enter Standby mode.
Note
When the Auto Power Off function is set to other than “Disable”, 30 seconds before the
projector enters Standby mode, the message will appear on the screen
Quick Cooling
This function changes the cooling time.
Off: The cooling time will be normal time.
On: The cooling time is reduced.
Standby Settings
This function is setting power consumption reduction in standby mode.
LAN Control
You can be used Network function in Standby mode.
Off: Network functions are switched off in Standby mode.
On: Network functions are activated even if the projector is in Standby mode.
Network Settings
Allow you to configure the wired LAN settings. Refer to "Setting up the Projector
Network Environment" on page 33.
DHCP Client
Connect the LAN cable before turning the projector on. If not, the DHCP Client
function does not work.
On: Obtains configuration parameters for TCP/IP network automatically.
Off: Sets the TCP/IP manually.
When "DHCP Client" is set to "On", Select "Save Settings", then press ENTER.
IP Address
Factory default setting: 0. 0. 0. 0
Enter an IP address appropriate for the network.
Subnet Mask
Factory default setting: 0. 0. 0. 0
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Acer FL-420 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Acer FL-420 in the language / languages: English as an attachment in your email.

The manual is 3,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info