551431
2
Zoom out
Zoom in
Previous page
1/8
Next page
Operating Instructions
GB
Introduction
Thank you for choosing this Shredder from Rexel. We are sure it will serve you well, but please take a little
time to study these instructions to ensure that you get the best out of your machine.
Safety First
Shredders are safe to use so long as you take a few simple safety precautions:
Ensure the machine is plugged into an easily accessible power outlet, and ensure the flex is not likely
to trip up a passer by.
Do not operate the machine unless it is located on the waste bin provided.
The models V-25/V-35/V-55/V-125 have a cross cut action, which is potentially more hazardous than
the straight cut models V-20/V-30/V-50/V-120 do not attempt to operate the machine unless it is
correctly seated on the bin.
Do not attempt to put your hand inside the bypass entry at any time, particularly when the machine is
in operation.
Any attempt to repair this unit by unqualified personnel will invalidate the warranty. Please return to
supplier.
Do not use cleaning solutions on the surface of this machine! Clean with wet cloth and soap only
.
Operation
1. Push the switch to the on position ( I).
2. Feed paper into the entry to activate the auto start trigger.
3. Cutters will stop automatically after the paper has passed through the head.
4. Empty the waste basket regularly to ensure the shredder exit does not become blocked with paper.
5. When not in use, move the switch to the off position (O).
Clearing Paper Overloads
1. If the machine stops due to excessive paper volume, move the switch to the reverse position (R)
and hold until the paper has cleared from the exit.
2. Separate the sheets and re-feed a smaller quantity.
3. If the sheet jams when reversing, tear off the accessible sheets and move the switch to the forward
position. If this fails to clear, repeat the process again.
4. In the case of serious paper jam, please take the unit to your authorised service provider.
5. Warning do not under any circumstances use any metal objects (scissors, letter openers, etc.) in an
attempt to clear the entry this model has mains voltage inside the casing, which could cause serious
injury.
Cross Cut Models
1. The cross-cut models use a sharpening cutting mechanism, which make the exit of the unit dangerous
when in use. Always ensure the unit is correctly seated on the waste basket provided before operation.
2. Disconnect from the power supply when removing paper manually from the exit.
3. Take extra care when this unit is in use near young children (for example in the home office) ensure
they are not left unattended when this machine is connected to the power supply.
Warranty
This product is guaranteed for 24 months from date of purchase please return the unit to your supplier if
you experience any problems. This does not affect your statutory rights.
CONFORMS TO CURRENT E.C. SAFETY REGULA
TIONS.
DETAILS AVAILABLE FROM YOUR SUPPLIER.
V20/V30
V25/V35 V55 V125
4 x 45mm
4 x 34mm 4 x 34mm
4-5 6-7 7-8
18L 23L 35L
Duty Cycle (min) 1min/5min 2min/4min 2min/4min
Temps d’utilisation
V50 V120
5.8mm 5.8mm 5.8mm
7-8 10-11 12-13
18L 23L 35L
Duty Cycle (min) 2min/30min 2min/4min 2min/4min
Temps d’utilisation
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Acco V-50 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Acco V-50 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Swedish, Spanish as an attachment in your email.

The manual is 0,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info