554260
4
Zoom out
Zoom in
Previous page
1/38
Next page
4
Specifications
Cutting Type
Shred Size
Security Class
Sheet Capacity (one pass)
Entry Width
Product Dimensions
Rated Voltage/Frequency
Rated Current
Rexel ProStyle Shredder Rexel Style+ Shredder Rexel Style CC Shredder
Confetti Cut Confetti Cut Confetti Cut
4x35mm 4x23mm 4x30mm
DIN S3 DIN S3 DIN S3
11sheets(80gsm) 7sheets(80gsm) 5sheets(80gsm)
230mm 230mm 230mm
430x232x410mm 378x203x360mm 340x185x320mm
220-240V~50Hz 220-240V~50Hz 220-240V~50Hz
2A 1.6A 0.8A
Rexel Style RC Shredder
RibbonCut
5.8mm
DIN S2
7sheets(80gsm)
230mm
340x185x320mm
220-240V-50Hz
0.8A
Description of product parts (fig 1)
1
Power Cable (Euro plug shown)
2
Viewing window
3
Paper entry slot
Introduction
ThankyouforchoosingthisShredderfromRexel.Wearesureitwill
serveyouwell,butpleasetakealittletimetoreadtheseinstructionsto
ensure you get the best out of your machine.
Safety First
•Pleasestorethisinstructionmanualinasafeplaceforfuture
reference.
•Pleasepaycloseattentiontothesafetysymbolsonthetopofthe
shredder and operate the machine accordingly.
•Iftheshredderneedscleaning,unplugtheunitfromthepowersocket
and use a damp cloth. NB. Do not use any cleaning products to clean
the unit.
•Donotpositiontheunitneartoanobjectthatradiatesheat.
•Donotplacetheunitinadampenvironment.
•Takecarenottosplashanyliquidontothemachine.
•Returntheproductandproofofpurchasewithreceipttothestoreat
which it was purchased if…
- The power cable or plug is broken.
- The machine malfunctions because liquid was accidentally spilt onto
the machine.
- The shredder doesn’t operate despite following the guidelines in the
manual.
•Makesurethepowercableisn’tatriphazard.
•Pleaseensurethepowersupplyiscompatiblewiththerequirements
ofthemachine(220-240V50Hz).
•Toavoidriskofinjury,donotopenthemachine’scasingtoattemptDIY
repair.Anyattemptedrepairbyanunqualiedpersonwillinvalidate
the warranty.
DO NOT attempt to repair shredder yourself.
KEEP OUT OF REACH OF CHILDREN.
m
m
Preparation before use
Howtousetheshreddercorrectly:
1
Takecarenottoinsertngers,tiesorotherobjectsintotheentry
slot of the shredder.
2
Trytoavoidlaminatingmaterials,plasticbagsetc.frombeing
passed through the shredder. This will prevent damage to the
cutters.
3
Do not shred wet paper as it can tangle in the cutters.
4
Do not shred more than the stated sheet capacity in one pass.
5
Do not shred continuously for more than 3 minutes at a time (2
minutesStyleRC).Runningtheunitfortoolongmaymakethemotor
overheat.Ifthemotoroverheats,allowittocooldownforatleast
30 minutes before resuming use.
6
Donotusethe“REV”(
) (reverse) function if it’s not necessary.
Overuseofthe“REV”(
) function can result in shredded paper
becomingjammedintheentryslot,whichwilladverselyaffectthe
performance of the shredder.
Correct operating procedure (fig 2)
1
Insert plug into the AC power socket.
2
Check the shredder bin is fully closed.
3
Push the switch to the ON/AUTO position (standby mode)
4
Whennotinuse,pushtheswitchtotheO(offposition)
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Acco Style RC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Acco Style RC in the language / languages: All languages as an attachment in your email.

The manual is 5,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info