554258
5
Zoom out
Zoom in
Previous page
1/38
Next page
5
G
Warranty
ACCO Brands Europe warrants its product/products and their parts
against defects in materials and workmanship under normal use for a
period of 2 years from the original date of purchase. During this period
we will repair or replace a defective product or part subject to the
following warranty conditions:
The warranty applies only to defects in materials and workmanship
under normal use and does not extend to damage to the Product or
parts which result from:-
(a)Alteration,repair,modicationorservicecarriedoutbyanyoneother
than an authorised ACCO service centre.
(b)Accident,neglect,abuseormisuseowingtofailuretocomplywith
the normal operating procedures for a product of this type.
Nothing in this Warranty shall have the effect of excluding the liability of
ACCO in respect of death and personal injury caused by the negligence
of ACCO. This Warranty is offered (subject to these terms and conditions)
inadditionto,anddoesnotaffectyourstatutoryrights.
These conditions shall in all respects be governed and construed in
accordance with English Law and subject to the exclusive jurisdiction of
the English Courts.
Registerthisproductonlineatwww.accoeurope.com
Cautions
•Donotshredcontinuouslyformorethan3minutes(2minutesStyle
RC).Whenthemotorhasoverheated,thethermalsafetyswitchwill
startworkingautomatically.Ifthethermalswitchtrips,donotuse
the machine for about 30 minutes while the thermal sensitive safety
switch cools down so the shredder can be safely used again.
•Thismachineisnotatoy.Keepawayfromchildrenandpets.
•Forindooruseonly.
•Neverinsertngersintotheentryslotoftheshredder.
•Turnthepoweroffimmediatelyifyourhair,tieorsleevebecomes
entangled in the shredder.
•Theshredderbinmustbefullypushedclosedforthemachineto
operate.
•Emptytheshredderbinwhenitisfullotherwisetheshredder’s
performance will be adversely affected. Operating the shredder with a
fullshredderbincanresultinpaperjamminginthecutters,whichwill
increase the machine’s noise level.
•Donotforcedownshredderpaperinthebinusingyourfeet.
m
Emptying the pull-out waste bin
(fig 4)
Empty the shredder bin when the shredder paper is visible through the
viewing window on the side of the pullout bin.
1
Pull out the shredder bin (fully).
2
Empty the shredder bin into a waste sack.
3
Push the shredder bin back in ensuring it is fully closed.
Auto shred and stop
•Placethepaperorcreditcardintothecentreoftheentryslot-
shreddingwillstartautomatically(g3).
•PapersmallerthanA4inwidthshouldbeplacedinthemiddleofthe
entry slot to ensure the shredder works automatically.
•Thecutterswillstoprotatingautomaticallyafternishingshredding
•Donotshredmorethanthestatedsheetcapacityatatime.
•Iftoomanysheetsareinsertedatatime,theshreddercanbecome
jammed.Iftheshredderbecomesjammed,switchthebuttontoREV
(
) position to clear the jam by reversing the paper. If the paper has
becomesoentangledinthecutterthatitcan’tbereversed,turnoff
thepowerandpulloutthepaperbyhand.Restartwithfewersheets
andfeedthenon-shreddedendofthepaperinrst.
Troubleshooting
Ifthepapershredderwillnotstart,pleasecheckthefollowing:
1
Is the machine plugged in correctly?
2
Is the switch pushed to the ‘ON/AUTO’ position?
3
Is the machine jammed with paper?
4
Hasthemotoroverheated?
5
Is the shredder bin fully pushed in?
Incaseofjammedpaper,pleasefollowtheprocedurebelow:
1
Check if the bin is too full with paper - the bin should be emptied
regularly to avoid paper becoming jammed in the cutters.
2
Slidetheswitchtothe‘REV’(
) position to reverse the jammed
paper.
3
If the paper is so jammed that it will not come out in reverse
function,slowlypushtheswitchbetween‘REV’(
) and ON/AUTO.
Do not do this too quickly as this can damage the shredder.
4
WARNING – Do not under any circumstances use any metal objects
(scissors,letteropenersetc.)inanattempttocleartheentry–this
modelhasmainsvoltageinsidethecasing,whichcouldcause
serious injury.
This machine does not require lubricant. Acco Brands Europe accepts no
liability for product performance or safety should any lubricant be used
on any part(s) of this machine.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Acco Style plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Acco Style plus in the language / languages: All languages as an attachment in your email.

The manual is 5,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info