692264

Abus TVAC18000A Manual

60
Zoom out
Zoom in
Previous page
1/151
Next page
English
11 Tips for troubleshooting
No. Questions Answers
1
What does pairing the
recorder and camera mean
and how does this work?
Pairing creates the exclusive, encrypted wireless connection
between the recorder and camera.
To connect a camera with the recorder, proceed as follows:
1. Connect the camera and the recorder to the power supply.
2. In the recorder menu, select “Camera”, then “Pairing” and
the required camera (1–4). The system counts down from
60 seconds.
3. During the 60 seconds, press the PAIRING button on the
camera cable until the green LINK LED on the front of the
camera starts flashing.
4. The LINK LED is lit up continuously once the connection is
established.
2
What could be the reasons
why no image is shown on
the monitor?
If you do not have a signal, please check the following:
1. Is the camera connected to the power supply (does the
LED light up red)?
2. Is the HDMI cable connected properly?
3. Are the camera and the recorder paired with each other
(see question 1)?
4. Is the camera within range of the recorder?
5. Is the signal between the camera and recorder disrupted?
3
What could be the reasons
why the device does not
record when there is
movement?
1. Please check that the sensitivity function of the motion
detection is switched on.
2. Is the schedule configured correctly?
4
What could be the reasons
why the device does not
record although a schedule
has been created?
Possible reasons are:
1. Are the date and time set correctly?
2. Is the SD card locked (Lock/Unlock?), not inserted or
empty?
3. Have you formatted the SD card or the external hard disk
drive? It must be formatted before it is first used.
4. No movement was detected.
5
What could be the reasons
why the camera cannot be
paired with the recorder?
Please check the following:
1. The camera has no power supply.
2. Briefly press the pairing button on the camera while the
monitor counts down from 60.
3. Please press the pairing button for a short time only, not
continuously.
4. Restart the recorder.
7
What could be the reasons
why the live view can be
accessed via app in the local
network but not externally.
Please check the following:
1. Is the recorder connected to the network?
2. Do you have an internet connection?
3. Have you connected the recorder to the internet?
Please note the following icon
at the top edge of the
monitor.
4. Does your password for the recorder match the password
for the app?
5. Do you have a fast enough internet connection to your
mobile phone?
58
… 60 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Abus TVAC18000A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Abus TVAC18000A in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 2,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info