755222
84
Zoom out
Zoom in
Previous page
1/116
Next page
Chapter III – Installation instructions –Option 94: Power Supply
78
2.54 Option 94: Power Supply
1 – Panel Voltage
This option shows the output voltage provided for
the auxiliary voltage connections and connected
modules such as operating panels. To ensure
that connected modules work correctly, the
voltage should be between 11 and 14V DC.
Values under 11V DC could result in an
excessive load or a fault in the voltage supply.
The measurement accuracy is ±0.2V.
2 – Battery Voltage
This option displays the battery voltage in the
alarm centre. The measurement accuracy is
±0.2V.
3 – Charge Voltage
Displays the battery load voltage of the alarm
centre. The measurement accuracy is ±0.2V.
4 – Charge Current
Displays the battery load current of the alarm
centre. Depending on the capacity of the battery
used, this can be up to 750mA. The value is 0 if
the discharge current (see below) is not 0.
5 – Discharge Current
Displays the discharge current if the system is
powered by the battery.
6 – Load Current
Displays the total used current provided by the
power supply except for the battery load. The
measurement accuracy is ±50mA. The load and
charge current should not exceed 1.5A.
7 – Source Current
The voltage displays the total current flowing into
the alarm centre via the auxiliary 12V DC voltage
connections. The value should be 0 if the alarm
centre is wired correctly.
Power Supply 1
Panel Voltage
Power Supply 2
Battery Voltage
94:Power Supply
Battery Voltage
13.54 Volts
84


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Abus Terxon LX - AZ4200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Abus Terxon LX - AZ4200 in the language / languages: English as an attachment in your email.

The manual is 1,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Abus Terxon LX - AZ4200

Abus Terxon LX - AZ4200 User Manual - English - 16 pages

Abus Terxon LX - AZ4200 Installation Guide - German - 31 pages

Abus Terxon LX - AZ4200 User Manual - German - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info