755224
10
Zoom out
Zoom in
Previous page
1/32
Next page
10
9.) Bus output
For connecting further extension modules to the bus.
10.) Not used
All dip-switches must be switched to “OFF”.
11.) Tamper jumper
If the jumper is closed, the lid tamper of the extension
module is switched off.
12.) Tamper contact
13.) Volume potentiometer
For adjusting the volume of external loudspeakers
14.) Connecting loudspeakers (optional)
Up to 2 external 16 Ohm loudspeakers can be connected in
series. The loudspeakers can be adjusted by the
potentiometer on the PCB.
Important: If you connect an external loudspeaker, you
should connect an extra voltage supply to the 8-zone wired
extension.
Output (-2)
In the factory setting, the relay switches from 12 V DCto 0V
when the output is activated. The maximum current is
100mA. This output can be inverted during programming if
necessary.
15.) JP4
The jumper must be set to Position 3.
16.) Output (+1)
In the factory setting, the relay switches from 12 V DCto 0V
when the output is activated. The maximum current is
100mA. This output can be inverted during programming if
necessary.
17.) Address of 8-zone wired extension
Set the jumper to the position matching the extension.
Important: Make sure that an address is not used more
than once on a bus.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Abus Terxon LX - AZ4230 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Abus Terxon LX - AZ4230 in the language / languages: English, German, Dutch, Danish, French, Italian as an attachment in your email.

The manual is 1,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info