755257
13
Zoom out
Zoom in
Previous page
1/20
Next page
Installation and start-up
33
If DIP switch 6 (chip key reader) is activated when the control panel starts
up, the status LED for partition 1 will flash green during chip key reader
calibration.
If DIP switch 6 (chip key reader) is deactivated when the control panel
starts up, calibration will be performed as soon as the DIP switch is
activated.
Keep the chip key and any other metal objects away from the chip key
reader during calibration to avoid disrupting the process.
If the tamper contact is open when the control panel starts up, the
following LED test will be performed:
(1.) All four status LEDs flash red
(2.) The transmitting LED (RF TX) located on the PCB lights up
(3.) The test LED (TEST) lights up
(4.) The SW version of the control panel is indicated by the RF TX LED
If the tamper contact is closed when the control panel starts up, the
aforementioned test will not be performed.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Abus Secvest FUBE50000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Abus Secvest FUBE50000 in the language / languages: English as an attachment in your email.

The manual is 0,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Abus Secvest FUBE50000

Abus Secvest FUBE50000 User Manual - German - 20 pages

Abus Secvest FUBE50000 User Manual - Dutch - 20 pages

Abus Secvest FUBE50000 User Manual - French - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info