Manual Abus Secvest - FUSG50110 (page 50 of 168) (English, German, Dutch, Danish, French, Italian)

755211

Zoom out

Zoom in

1/168

Functions and displays

50 | EN

Acoustic signal tones

The sounder is able to generate a wide range of acoustic signal tones. These are similar to the

alarm tones, information tones and operating tones of the wireless alarm panel.

The following table shows an overview of the signal tones and their group assignment.

Signal tones

Meaning

Alarm tones:

Breaking and entering/intrusion

Fire

Medical alarm

Emergency call

Info tones:

Chime

Exit tone

E.g.:

Long continuous beep (beeeeeeeeeeeep):

During the exit delay time. All zones closed, the alarm panel is

activated after the delay time has expired.

Exit tone in the event of a fault

E.g.:

Interrupted beeps (beep…beep…beep):

A zone was opened during the exit delay time. It must be closed

before the delay time expires.

Entry tone

E.g.:

Interrupted beeps (beep…beep…beep):

During the entry delay time.

Operator

Sounds

Acknowledgement/confirmation

E.g.:

Double deep (beep, beep):

The alarm panel has been successfully activated.

Error E.g.:

Short beep (beep):

System fault, the alarm panel cannot be activated

Note

When the sounder is being operated through batteries only, it eliminates the playback

of information and operating tones.

During operation with a power supply unit, alarm, information and operating tones are

signalled.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Abus Secvest - FUSG50110 in the language / languages: English, German, Dutch, Danish, French, Italian as an attachment in your email.

The manual is 1,1 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Abus Secvest - FUSG50110 Manual

Product: